CAT50 1 x 6.30 - Shrink Fit Tool Holder

Item #: GM94C50106309
Manufacturer: Parlec
Mfg #: C50-10SF63

Technical Specifications:
*Bore Diameter: 1 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: C50-10SF630-9 *Shank: CAT50 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

$ 391.56

NANO Calibration Adapter

Item #: HA728016501
Manufacturer: Haimer USA LLC
Mfg #: 80.165.01

Technical Specifications:
*Brand Name: Haimer USA LLC *Model Number: 80.165.01 *Standard: Nano *Type: Calibration Adapter

Description:

Shipping Info:

$ 399.72

BT50 25MMX100MM GL SHRINK FIT CHUCK

Item #: HA715064025
Manufacturer: Haimer USA LLC
Mfg #: 50.640.25

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - 7.7000

$ 536.36

ST19.05-SLS5/16-110

Item #: TP349910143
Manufacturer: OSG USA, Inc.
Mfg #: 9910143

Technical Specifications:
*Brand Name: OSG USA, Inc. *List No.: SHRINK

Description:

Shipping Info:
*Actual Weight - .3900 *Dimensions - Height: 1.20 Length: 4.45 Width: 1.30

$ 269.49

CS12-5-55

Item #: TP348910083
Manufacturer: OSG USA, Inc.
Mfg #: 8910083

Technical Specifications:
*Brand Name: OSG USA, Inc. *List No.: SHRINK

Description:

Shipping Info:
*Actual Weight - .4000 *Dimensions - Height: 1.20 Length: 4.05 Width: 1.25

$ 256.11

CF12-3-35

Item #: TP348910050
Manufacturer: OSG USA, Inc.
Mfg #: 8910050

Technical Specifications:
*Brand Name: OSG USA, Inc. *List No.: SHRINK

Description:

Shipping Info:
*Actual Weight - .3950 *Dimensions - Height: 1.15 Length: 3.25 Width: 1.30

$ 465.10

CAT50 16mm x 160mm Power Shrink Fit Chuck

Item #: HA7150842163
Manufacturer: Haimer USA LLC
Mfg #: 50.842.16.

Technical Specifications:
*Bore Diameter: 16mm *Brand Name: Haimer USA LLC *Gage Length: 160mm *Model Number: 50.842.16.3 *Outside Diameter: 34mm *Shank: CAT50 *Type: Power Shrink Fit Chuck

Description:
*Precesion AT3 Tolerance Shank *Balanced to G2.5 at 22,000 RPM *Highest Possible Clamping Force *< 3-micron T.I.R. *All functional surfaces precision ground

Shipping Info:
*Actual Weight - 9.5000

$ 1,007.46

BT40 6MMX200MM GL POWER MINI SHRINK

Item #: HA7140686068
Manufacturer: Haimer USA LLC
Mfg #: 40.686.06.

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - 4.6640

$ 604.68

CAT50 10mm x 60mm - Shrink Fit Tool Holder

Item #: GM94C50M101609
Manufacturer: Parlec
Mfg #: C50-M10SF1

Technical Specifications:
*Bore Diameter: 10mm *Brand Name: Parlec *Gage Length: 160mm *Model Number: C50-M10SF160-9 *Shank: CAT50 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

$ 423.18

HSK-A80 18mm Bore Dia. x 100mm Gage Length Shrink Fit Toolholder

Item #: GM266726874
Manufacturer: Bilz
Mfg #: 6726874

Technical Specifications:
*Bearing Surface: 50mm *Bore Diameter: 18mm *Brand Name: Bilz *Gage Length: 100mm *Outside Diameter: 42mm *Shank: HSK-A80 *Type: Shrink Fit Toolholder

Description:

Shipping Info:
*Actual Weight - 6.2000

$ 460.90

CAT40 6mm x 80mm - Shrink Fit Tool Holder

Item #: GM94C40M06809
Manufacturer: Parlec
Mfg #: C40-M06SF8

Technical Specifications:
*Bore Diameter: 6mm *Brand Name: Parlec *Gage Length: 80mm *Model Number: C40-M06SF80-9 *Shank: CAT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 3.0000

$ 256.96

HSKA100 20MMX200MM PWER SHRINK CHK

Item #: HA71A101462037
Manufacturer: Haimer USA LLC
Mfg #: A10.146.20

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - 13.4420

$ 1,529.55

20mm CAT 40 Shrink Fit Toolholder - 120mm Gauge Length

Item #: GM3020M120D
Manufacturer: Briney
Mfg #: V40SF-20M-

Technical Specifications:
*Bearing Surface: 42mm *Bore Diameter: 20mm *Brand Name: Briney *Gage Length: 4.724 *Outside Diameter: 40mm *Shank: CAT40 *Standard: DIN *Type: CV Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 6.0000

$ 342.62

20MM-8MMX200MM GL SHRINK EXTENSION

Item #: HA717720008
Manufacturer: Haimer USA LLC
Mfg #: 77.200.08

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .5500

$ 297.75

CAT50 50mm x 200mm HD Power Shrink Fit Chuck

Item #: HA7150856506
Manufacturer: Haimer USA LLC
Mfg #: 50.856.50.

Technical Specifications:
*Bore Diameter: 50mm *Brand Name: Haimer USA LLC *Gage Length: 200mm *Model Number: 50.856.50.6 *Outside Diameter: 82mm *Shank: CAT50 *Type: Power Shrink Fit Chuck

Description:
*Precesion AT3 Tolerance Shank *Balanced to G2.5 at 22,000 RPM *Highest Possible Clamping Force *< 3-micron T.I.R. *All functional surfaces precision ground

Shipping Info:
*Actual Weight - 12.0000

$ 1,353.14

HSK A 63 SRKIN1 X4.528 SHRINK-IN

Item #: TG604503929
Manufacturer: Tungaloy
Mfg #: 4503929

Technical Specifications:
*Brand Name: Tungaloy

Description:

Shipping Info:
*Actual Weight - .0090

$ 503.14

HSK-A100 3/4" Bore Dia. x 6.3 Gage Length Shrink Fit Toolholder

Item #: GM265057084
Manufacturer: Bilz
Mfg #: 5057084

Technical Specifications:
*Bearing Surface: 2.05 *Bore Diameter: 3/4" *Brand Name: Bilz *Gage Length: 6.3 *Outside Diameter: 1.65 *Shank: HSK-A100 *Type: Shrink Fit Toolholder

Description:

Shipping Info:
*Actual Weight - 7.6000

$ 607.74

BT30 5/8X2.56"GL SHRINK FIT CHUCK

Item #: HA713064558Z2
Manufacturer: Haimer USA LLC
Mfg #: 30.645.5/8

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - 1.2760

$ 302.85

BT30 1/8X3.15"GL SHRINK FIT CHUCK

Item #: HA713064018Z
Manufacturer: Haimer USA LLC
Mfg #: 30.640.1/8

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .9020

$ 373.21

BT50 16MMX100MM GL SHRINK FIT CHUCK

Item #: HA715064016
Manufacturer: Haimer USA LLC
Mfg #: 50.640.16

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - 6.3800

$ 536.36