3-12mm Tool Clip SET

Item #: HA728016600
Manufacturer: Haimer USA LLC
Mfg #: 80.166.00

Technical Specifications:
*Brand Name: Haimer USA LLC *Description: 3-12mm *Model Number: 80.166.00 *Type: Tool Clip Set

Description:

Shipping Info:

$ 917.73

BT50 25MMX100MM GL POWER SHRINK CHK

Item #: HA7150640253
Manufacturer: Haimer USA LLC
Mfg #: 50.640.25.

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - 9.4820

$ 908.55

HSK-F63 3/4" Bore Dia. x 3.94 Gage Length Shrink Fit Toolholder

Item #: GM265057142
Manufacturer: Bilz
Mfg #: 5057142

Technical Specifications:
*Bearing Surface: 2.05 *Bore Diameter: 3/4" *Brand Name: Bilz *Gage Length: 3.94 *Outside Diameter: 1.65 *Shank: HSK-F63 *Type: Shrink Fit Toolholder

Description:

Shipping Info:
*Actual Weight - 2.5000

$ 311.01

CDPM12SRK1/8X1.75 ROTARY TOOLING

Item #: IC104502698
Manufacturer: Ingersoll Cutting Tools
Mfg #: 4502698

Technical Specifications:
*Brand Name: Ingersoll Cutting Tools

Description:

Shipping Info:
*Actual Weight - .1320

$ 95.35

CS12-5-80

Item #: TP348910084
Manufacturer: OSG USA, Inc.
Mfg #: 8910084

Technical Specifications:
*Brand Name: OSG USA, Inc. *List No.: SHRINK

Description:

Shipping Info:
*Actual Weight - .4600 *Dimensions - Height: 1.20 Length: 4.95 Width: 1.25

$ 302.61

T3-WSG/HSK63-HSK40 Modification Set

Item #: GM289102762
Manufacturer: Bilz
Mfg #: 9102762

Technical Specifications:
*Brand Name: Bilz

Description:

Shipping Info:
*Actual Weight - 3.8000

$ 526.17

CAT50 1" Bore Dia. x 6.3 Gage Length Shrink Fit Toolholder

Item #: GM279074117
Manufacturer: Bilz
Mfg #: 9074117

Technical Specifications:
*Bearing Surface: 2.44 *Bore Diameter: 1" *Brand Name: Bilz *Gage Length: 6.3 *Outside Diameter: 2.36 *Shank: CAT50 *Type: Shrink Fit Toolholder

Description:

Shipping Info:
*Actual Weight - 8.7000

$ 534.32

HSK-E40 10MMX60MM GL SHRINK FIT CHK

Item #: HA71E4014510
Manufacturer: Haimer USA LLC
Mfg #: E40.145.10

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - .8800

$ 405.84

6mm Strght SH .75 Dia Shrink Fit Tool Ext. 7.00" Long

Item #: GM30SF6M700
Manufacturer: Briney
Mfg #: SS075SF-6M

Technical Specifications:
*Bearing Surface: 1.000 *Bore Diameter: 6mm *Brand Name: Briney *Gage Length: .750 *Outside Diameter: .750 *Shank: SS *Standard: ANSI *Type: SS Shrink Fit

Description:
*Materials certified and traceable to NIST standards *360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity *Balanced to 20,000 RPM at G2.5 *Maximum .0002? T.I.R. or better *Certified H-13 material

Shipping Info:
*Actual Weight - 1.5000

$ 265.12

HSKA125 32MMX160MM HD SHRINKFIT CHK

Item #: HA71A1251523267
Manufacturer: Haimer USA LLC
Mfg #: A125.152.3

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - 19.5074

$ 2,867.40

CF12-3-55

Item #: TP348910051
Manufacturer: OSG USA, Inc.
Mfg #: 8910051

Technical Specifications:
*Brand Name: OSG USA, Inc. *List No.: SHRINK

Description:

Shipping Info:
*Actual Weight - .4450 *Dimensions - Height: 1.15 Length: 4.05 Width: 1.30

$ 512.25

BT50 3/4 SHRINK FIT HOLDER

Item #: GM7650SF0750630
Manufacturer: Lyndex
Mfg #: BT50-SF075

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$ 762.74

HSK100A 16MM SHRINK FIT HOLDER

Item #: GM76500726
Manufacturer: Lyndex
Mfg #: H100A-SF16

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$ 583.27

CAT40 1/4 SHRINK FIT HOLDER

Item #: GM7640SF0250630
Manufacturer: Lyndex
Mfg #: CAT40-SF02

Technical Specifications:
*Brand Name: Lyndex

Description:

Shipping Info:
*Actual Weight - .9900

$ 235.55

BT40 8MMX200MM GL POWER MINI SHRINK

Item #: HA7140686088
Manufacturer: Haimer USA LLC
Mfg #: 40.686.08.

Technical Specifications:
*Brand Name: Haimer USA LLC

Description:

Shipping Info:
*Actual Weight - 4.6640

$ 604.68

CAT50 12mm x 160mm - Shrink Fit Tool Holder

Item #: GM94C50M121609
Manufacturer: Parlec
Mfg #: C50-M12SF1

Technical Specifications:
*Bore Diameter: 12mm *Brand Name: Parlec *Gage Length: 160mm *Model Number: C50-M12SF160-9 *Shank: CAT50 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 9.5000

$ 423.18

BT40 7/16 x 6.30 - Shrink Fit Tool Holder

Item #: GM94BT40436309
Manufacturer: Parlec
Mfg #: BT40-43SF6

Technical Specifications:
*Bore Diameter: 7/16 *Brand Name: Parlec *Gage Length: 6.300 *Model Number: BT40-43SF630-9 *Shank: BT40 *Standard: DIN

Description:
*Shrink Fit Tool Holder *Improved concentricity *Improved balance design with no moving pieces *Low Centrifugal Forces due to low holder mass *For maximum gripping power with exceptional concentricity *Concentricity of .0001" with tool shrunk in holder *Chip load distributed evenly along cutting edge of tool which results in longer tool life *Constructed of double tempered Tool Steel for exceptional durability and cycle life *With proper use, toolholder life should exceed that of standard end mill holders *Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force *Short projections are possible because no mechanical clamping devices are used *This results in greater rigidity and resistance to bending *Simple and fast to use *The total time elapsed to remove one cutting tool and insert another is less than 10 seconds *Through-spindle coolant capability *Coolant through holders require no special backup screws or seals *The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves *The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use

Shipping Info:
*Actual Weight - 5.0000

$ 316.11

ER32 SRK 1/4X1.500 JET2 SHRINK FIT

Item #: EH4500899
Manufacturer: Iscar
Mfg #: 4500899

Technical Specifications:
*Brand Name: Iscar

Description:

Shipping Info:
*Actual Weight - .3970

$ 141.57

HSK-A80 32mm Bore Dia. x 120mm Gage Length Shrink Fit Toolholder

Item #: GM266726882
Manufacturer: Bilz
Mfg #: 6726882

Technical Specifications:
*Bearing Surface: 62mm *Bore Diameter: 32mm *Brand Name: Bilz *Gage Length: 120mm *Outside Diameter: 53mm *Shank: HSK-A80 *Type: Shrink Fit Toolholder

Description:

Shipping Info:
*Actual Weight - 6.6000

$ 460.90

HSK A 63 20MM CELSIO SSF

Item #: HF80208137
Manufacturer: Schunk
Mfg #: 208137

Technical Specifications:
*Brand Name: Schunk

Description:

Shipping Info:
*Actual Weight - 1.4000

$ 341.60