TOSHIBA TUNGALOY Insert Grades and Chipbreakers
Featuring AH120-The Super Grade!
Special PVD TiAlN coated carbide combined with super tough substrate. Ideal for general turning of steels, stainless and super alloys! CERMET GRADES
| Cermet | Properties | Application |
| NS530 | Has high wear resistant and excellent thermal and mechanical shock resistance.Performs well in wet cutting | General purpose grade covering a wide range of cutting conditions from low to high speeds for various steels |
| AT530 | TiAlN coated cermet. Provides superior resistance to flank wear and adhesive wear | Suitable for high speed turning of steels and stainless steels requiring better surface roughness and longer tool life |
COATED CARBIDE GRADES
| Coated Carbide |
Properties | Application |
| T9105 | Ti + AlOxide; DISK Technology substrate with advanced coating | High speed cutting of steels and cast irons |
| T9115 | Ti + AlOxide; DISK Technology substrate with advanced coating | For general purpose turning of steels and stainless steels |
| T9125 | Ti + AlOxide; DISK Technology substrate with advanced coating | For general purpose turning of steels and stainless steels including interrupted and heavy cutting |
| T9135 | Ti + AlOxide; DISK Technology substrate with advanced coating | For general purpose turning of steels and stainless steels including severly interrupted and heavy cutting of steels |
| T6020 | Ti + AlOxide; tough substrate with new advanced coating | For general purpose turning of steels and stainless steels |
| T6030 | Ti + AlOxide; extra tough substrate with advanced coating | For rough and heavy turning of stainless steels |
| T5020 | Ti + AlOxide; well balanced wear resistance and toughness | Roughing and interrupted turning of cast irons |
| SH730 | Coated carbide with advanced coating | Ideal for stainless steels |
| AH110 | TiAlN coating; heat resistant coating and hard substrate allows excellent wear resistance | Turning of super (high temp) alloys and Non ferrous metals |
| AH120 | TiAlN coating; heat resistant coating and extremely hard substrate allows highest wear resistance | Turning and Milling of super (high temp) alloys, steels, stainless steels - great all purpose grade. |
| GH330 | TiCnO Coated carbide | General milling and turning of steels |
UNCOATED CARBIDE GRADES
| Uncoated Carbide |
Properties | Application |
| KS05F | Uncoated carbide with good overall wear resistance | Ideal for Aluminum |
| TH10 | K10(C2) type uncoated carbide - good overall wear resistance | General turning of Non Ferrous materials |
| H10T | Used for positive (boring) inserts; K10(C2) type uncoated carbide - good overall wear resistance and toughness | General boring of Non Ferrous materials |
| Chip Breakers |
Descriptions |
| TS | For Finishing - landless sharp cutting edges and large rake angle; excellent all round chipbreaker for finishing Steels |
| TM | For Medium cutting - unique breaker geometry with sharp cutting edges and large rake angle assures free cutting action in a wide range of cutting conditions - excellent for medium cutting of steels and super (high temp) alloys |
| TH | For Heavy cutting Double sided 3 dimensional chipbreaker with a wide land and broad groove used for medium to heavy cutting including interrupted cuts and in poor conditions - excellent for heavy and interrupted cutting of steels, stainless and super ( high temp) alloys |
| SS | For finishing - 3 dimensional chipbreaker with a large rake angle; very free cutting and most suitable for stainless steels and mild steels |
| SM | For Medium cutting - 3 dimensional chipbreaker offers low cutting forces over a wide range of cutiing conditions - especially suited for medium cutting of stainless steels and mild steels |
| SA | For finishing - designed to reduce contact area between tool and chip, preventing the insert from raising temperature during cutting - designed especially for medium cutting of stainless steels and super (high temp) alloys |
| P | For non ferrous metals - very sharp cutting edges |
| PM | 3 dimensional chipbreaker - has positive yet strong edge, provides good chip control for medium to rough cutting |
| PP | For general boring of Non Ferrous metals - high positive rake and very sharp cutting edges - low cutting forces and no chatter |
| PS | For finish to medium boring on positive inserts - steels, stainless steels |
| 28 | For general turning of Non ferrous metals - high positive rake angle for low cutting forces and excellent shearing ability - also effective for stainless steels and super (high temp) alloys |