DeWALT - 7/16" Drill Bit, 3/8" Shank Diam, 135°, High Speed Steel Silver & Deming Reduced Shank Drill Bit
Item #: 80483647
Brand: DeWALT
Model #: DW1328
Features and Benefits
High speed steel (HSS) provides good wear resistance and can be used in general purpose applications on both ferrous and nonferrous materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Straight shanks are used for general purpose applications. The shank is smaller than the drill bit diameter. They are used with portable drills and drill presses on ferrous and non-ferrous materials.
Spiral flutes are constructed with a higher flute angle to remove chips more easily.
Spiral flute reamers are used in blind and through-hole operations. They are used to bridge interrupted cuts.
Regular, also known as medium spiral bits, are used in general purpose applications. They are used on soft, nonferrous materials.
Spiral flutes are constructed with a higher flute angle to remove chips more easily.
| Product Specifications | |
|---|---|
| Drill Bit Size (Inch) | 7/16 |
| Drill Bit Size (Decimal) | 0.4375 |
| Shank Diameter (Inch) | 3/8 |
| Drill Point Angle | 135 |
| Drill Bit Material | High Speed Steel |
| Drill Bit Finish/Coating | TiN |
| Overall Length (Inch) | 4 |
| Overall Length (Decimal Inch) | 4 |
| Shank Type | Straight |
| Flute Length (Inch) | 4.0600 |
| Flute Length (Decimal Inch) | 4.0600 |
| Flute Type | Spiral |
| Through Coolant | No |
| Cutting Direction | Right Hand |
| Point Type | Split Point |
| Point Type | Split Point |
| Flute Type | Spiral |
| Maximum Drilling Depth (Decimal Inch) | 4.06 |
| Spiral Type | Regular Spiral |
| Spiral Type | Regular Spiral |
| Maximum Drilling Depth (Decimal Inch) | 4.06 |
| Spiral Type | Regular Spiral |
| Overall Length (Inch) | 4 |
| Flute Type | Spiral |
| Drill Point Angle | 135 |
| Cutting Direction | Right Hand |