BES 2023 $10+ Products - (25001 Products)
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.2568NC
Item #: 29733516
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.2568NC
Product Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+.00002/-.00000
Blank Number Wire Size
#1
Inner Diameter (Decimal Inch)
0.2568
Calibrated
Yes
Traceability Certification Included
NIST
Go/No Go
No Go
Standards
B47.1 Gage Standards; ASME B89.1.6
$ 368.16
MP3MCD3/16
Item #: MB0310579503
Brand: Mitsubishi Materials USA
Model #: 10579503
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Body Half Taper Angle (BHTA) | 15 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Peripheral Effective Cutting Edge Count (ZEFP) | 3 |
| Depth of Cut Maximum (APMX) | 0.469″ |
| Length Group | Medium |
| Overall Length (OAL) | 2″ |
| Decimal Equivalent | 0.1875″ |
| Coating | MS plus |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | MP3MC_INCH |
| End Shape | Center Cutting |
$ 53.71
3400SD_FC18 R1.00 6.00 SE
Item #: FT8592576
Brand: Fullerton Tool
Model #: 92576
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 20 mm |
| Corner Radius (RE) | 1 mm |
| Overall Length (OAL) | 64 mm |
| Tool Type | Center Cut|Single-End |
| Cutting Edge Material | Carbide |
| Length Group | Regular |
| Coating | FC18 |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.2362″ |
| Flute Helix Angle (FHA) | Variable |
| Series/List # | 3400 |
$ 29.21
MS2XLD3/32N0750 CARBIDE ENDMILL
Item #: MB03317278
Brand: Mitsubishi Materials USA
Model #: 317278
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.0938″ |
| Usable Length (LU) | 3/4″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Neck Diameter (DN) | 0.0898″ |
| Depth of Cut Maximum (APMX) | 0.0938″ |
| Body Half Taper Angle (BHTA) | 12 Degrees |
| Overall Length (OAL) | 2″ |
| Peripheral Effective Cutting Edge Count (ZEFP) | 2 |
| Coating | MS |
| Length Group | Long - Necked |
| Flute Count (NOF) | 2 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | MS2XL_INCH |
| End Shape | Square |
$ 53.77
3400SD_FC18 R0.30 6.00 SE
Item #: FT8592424
Brand: Fullerton Tool
Model #: 92424
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 20 mm |
| Corner Radius (RE) | 0.3 mm |
| Overall Length (OAL) | 76 mm |
| Tool Type | Center Cut|Single-End |
| Cutting Edge Material | Carbide |
| Length Group | Regular |
| Coating | FC18 |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.2362″ |
| Flute Helix Angle (FHA) | Variable |
| Series/List # | 3400 |
$ 29.21
1/16″ × 3/16″ × 3/16″ × 2-1/4″ RHS / RHC HSS HSS Double End 2-Flute Center Cutting Finishing End Mill - TiCN
Item #: CE60C39885
Brand: Cleveland Twist Drill
Model #: C39885
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 3/16″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 2-1/4″ |
| Decimal Equivalent | 0.0625″ |
| Cutting Edge Material | HSS |
| Measurement Type | Inch |
| Coating | TiCN |
| Series/List # | HMD-2-TC |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Double End |
| End Shape | Square |
$ 48.15
11/64″ × 3/16″ × 1/2″ × 2-1/4″ RHS / RHC HSS HSS Double End 2-Flute Center Cutting Finishing End Mill - TiCN
Item #: CE60C39892
Brand: Cleveland Twist Drill
Model #: C39892
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 11/64″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 2-1/4″ |
| Decimal Equivalent | 0.1719″ |
| Cutting Edge Material | HSS |
| Measurement Type | Inch |
| Coating | TiCN |
| Series/List # | HMD-2-TC |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Double End |
| End Shape | Square |
$ 46.29
3/16″ × 3/16″ × 1/2″ × 2-1/4″ RHS / RHC HSS HSS Double End 2-Flute Center Cutting Finishing End Mill - TiCN
Item #: CE60C39893
Brand: Cleveland Twist Drill
Model #: C39893
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 2-1/4″ |
| Decimal Equivalent | 0.1875″ |
| Cutting Edge Material | HSS |
| Measurement Type | Inch |
| Coating | TiCN |
| Series/List # | HMD-2-TC |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Double End |
| End Shape | Square |
$ 48.15
3/16″ × 3/16″ × 1″ × 3″ RHS / RHC Solid Carbide 4-Flute Square Nose Single End General Purpose End Mill - Bright
Item #: CE60C61838
Brand: Cleveland Twist Drill
Model #: C61838
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Tool Type | End Mill |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Length Group | Extra Long |
| Depth of Cut Maximum (APMX) | 1″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.1875″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Bright |
| Series/List # | CEM-SE-4 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
| End Shape | Corner Radius |
$ 46.10
3/16″ × 3/16″ × 1″ × 4″ RHS / RHC Solid Carbide 4-Flute Square Nose Single End General Purpose End Mill - Bright
Item #: CE60C61841
Brand: Cleveland Twist Drill
Model #: C61841
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Tool Type | End Mill |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Length Group | Extra Long |
| Depth of Cut Maximum (APMX) | 1″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.1875″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Bright |
| Series/List # | CEM-SE-4 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
| End Shape | Corner Radius |
$ 46.10
1/8″ Dia. × 1/8″ Shank × 3/8″ DOC × 1-1/2″ OAL, Carbide TiAlN, Spiral , 4 Flute, CW Helix, Round, Ballnose End Mill
Item #: CE60C80108
Brand: Cleveland Twist Drill
Model #: C80108
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Tool Type | End Mill |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Length Group | Regular |
| Depth of Cut Maximum (APMX) | 3/8″ |
| End Shape | Ball Nose |
| Overall Length (OAL) | 1-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.125″ |
| Coating | AP/MAX |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Series/List # | CEM-V-4B-TA |
| Flute Helix Angle (FHA) | CW |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
$ 46.03
1/4″ × 1/4″ × 3/4″ × 2-1/2″ RHS / RHC Solid Carbide 4-Flute Square Nose Single End General Purpose End Mill - TiAlN
Item #: CE60C81850
Brand: Cleveland Twist Drill
Model #: C81850
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Corner Radius (RE) | 0.02″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Length Group | Regular |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.25″ |
| Coating | TiAlN |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Series/List # | CEM-SE-4-TA |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Corner Radius |
| Single / Double End | Single End |
$ 45.96
1/4″ × 1/4″ × 3/4″ × 2-1/2″ RHS / RHC Solid Carbide 4-Flute Square Nose Single End General Purpose End Mill - TiAlN
Item #: CE60C81851
Brand: Cleveland Twist Drill
Model #: C81851
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Corner Radius (RE) | 0.03″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Length Group | Regular |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.25″ |
| Coating | TiAlN |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Series/List # | CEM-SE-4-TA |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Corner Radius |
| Single / Double End | Single End |
$ 45.96
15/64″ × 3/8″ × 5/8″ × 3-3/8″ RHS / RHC HSS-CO 8% (M42) Cobalt Double End 4-Flute Center Cutting Finishing End Mill - Bright
Item #: CE60C32930
Brand: Cleveland Twist Drill
Model #: C32930
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 15/64″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 3-3/8″ |
| Decimal Equivalent | 0.2344″ |
| Cutting Edge Material | HSS-CO 8% (M42) |
| Measurement Type | Inch |
| Coating | Bright |
| Series/List # | HDC-4C |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Weldon |
| Single / Double End | Double End |
| End Shape | Square |
$ 46.31
3400SD FC18 R0.30 6.00 SE
Item #: FT8592559
Brand: Fullerton Tool
Model #: 92559
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 20 mm |
| Corner Radius (RE) | 0.3 mm |
| Overall Length (OAL) | 64 mm |
| Tool Type | Center Cut|Single-End |
| Cutting Edge Material | Carbide |
| Length Group | Regular |
| Coating | FC18 |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.2362″ |
| Flute Helix Angle (FHA) | Variable |
| Series/List # | 3400 |
$ 29.21
15/64″ × 3/8″ × 1/2″ × 2-7/16″ RHS / RHC HSS-CO 8% (M42) Cobalt Single-End 2-Flute Center Cutting Finishing End Mill - TiCN
Item #: CE60C32533
Brand: Cleveland Twist Drill
Model #: C32533
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 15/64″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 2-7/16″ |
| Decimal Equivalent | 0.2344″ |
| Cutting Edge Material | HSS-CO 8% (M42) |
| Measurement Type | Inch |
| Coating | TiCN |
| Series/List # | HGC-2-TC |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Weldon |
| Single / Double End | Single End |
| End Shape | Square |
$ 46.25
21/64″ × 3/8″ × 3/4″ × 3-1/2″ RHS / RHC HSS-CO 8% (M42) Cobalt Double End 4-Flute Center Cutting Finishing End Mill - Bright
Item #: CE60C32933
Brand: Cleveland Twist Drill
Model #: C32933
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 21/64″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 3-1/2″ |
| Decimal Equivalent | 0.3281″ |
| Cutting Edge Material | HSS-CO 8% (M42) |
| Measurement Type | Inch |
| Coating | Bright |
| Series/List # | HDC-4C |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Weldon |
| Single / Double End | Double End |
| End Shape | Square |
$ 46.21
1/8″ Dia. × 1/8″ Shank × 3/4″ DOC × 2-1/4″ OAL, Carbide TiCN, Spiral , 4 Flute, CW Helix, Round, Ballnose End Mill
Item #: BA10B01374
Brand: Bassett
Model #: B01374
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Length Group | Long |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| End Shape | Ball Nose |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 2-1/4″ |
| Decimal Equivalent | 0.125″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TiCN |
| Series/List # | MSE-4B-TC |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | CW |
| Center Cutting | Yes |
| Shank Type | Round |
| Single / Double End | Single End |
| Tool Type | End Mill |
$ 47.98
7/32″ × 3/8″ × 1-1/4″ × 3-1/16″ RHS / RHC HSS HSS Single End Mulit Flute Center Cutting Finishing End Mill - Bright
Item #: CE60C33372
Brand: Cleveland Twist Drill
Model #: C33372
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/32″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 3-1/16″ |
| Decimal Equivalent | 0.2188″ |
| Cutting Edge Material | HSS |
| Measurement Type | Inch |
| Coating | Bright |
| Series/List # | HG-4C |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Weldon |
| Single / Double End | Single End |
| End Shape | Square |
$ 46.00
1/8″ × 1/8″ × 3/8″ × 1-1/2″ RHS / RHC Solid Carbide 4-Flute Variable Index End Mill - TiAlN
Item #: BA10B60166
Brand: Bassett
Model #: B60166
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Tool Type | End Mill |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Length Group | Regular |
| Depth of Cut Maximum (APMX) | 3/8″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 1-1/2″ |
| Decimal Equivalent | 0.125″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | AP/MAX |
| Series/List # | MSE-V-4R-TA |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | CW |
| Single / Double End | Single End |
| Shank Type | Round |
| Center Cutting | Yes |
| End Shape | Corner Radius |
$ 47.80