BES 2023 $10+ Products - (25001 Products)
Dovetail Cutters - 0.0620″ (1/16″) Cutter Diameter × 0.0050″Radius × 6° included Carbide Dovetail Cutter, 2 Flutes
Item #: GE90932304
Brand: Harvey Tool
Model #: 932304
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Angle | 6 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 1-1/2″ |
| Coating | Uncoated |
| Corner Radius (RE) | 0.005″ |
| Style | Dovetail |
$ 110.43
Dovetail Cutters - 0.1250″ (1/8″) Cutter Diameter × 0.0000″Radius × 4° included Carbide Dovetail Cutter, 2 Flutes
Item #: GE90883608
Brand: Harvey Tool
Model #: 883608
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Coating | Uncoated |
| Overall Length (OAL) | 1-1/2″ |
| Style | Dovetail |
| Angle | 4 Degrees |
$ 110.43
0.2500″ (1/4″) Cutter Diameter × 0.0312″ (1/32″) Radius × 0.3750″ (3/8″) Neck Length Carbide Full Radius Standard Keyseat Cutter, 6 Flutes, AlTiN Coated
Item #: GE9043331C3
Brand: Harvey Tool
Model #: 43331-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Cutting Width (CW) | 0.0624″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 2-1/2″ |
| Coating | AlTiN |
| Corner Radius (RE) | 1/32″ |
$ 107.28
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.325NC
Item #: 29727377
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.325NC
Product Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+.00002/-.00000
Blank Number Wire Size
#1
Inner Diameter (Decimal Inch)
0.3250
Calibrated
Yes
Traceability Certification Included
NIST
Go/No Go
No Go
Standards
B47.1 Gage Standards; ASME B89.1.6
$ 368.16
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.3071NC
Item #: 29719556
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.3071NC
Product Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+.00002/-.00000
Blank Number Wire Size
#1
Inner Diameter (Decimal Inch)
0.3071
Calibrated
Yes
Traceability Certification Included
NIST
Go/No Go
No Go
Standards
B47.1 Gage Standards; ASME B89.1.6
$ 368.16
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.3127NC
Item #: 29729332
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.3127NC
Product Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+.00002/-.00000
Blank Number Wire Size
#1
Inner Diameter (Decimal Inch)
0.3127
Calibrated
Yes
Traceability Certification Included
NIST
Go/No Go
No Go
Standards
B47.1 Gage Standards; ASME B89.1.6
$ 368.16
ECI-5 .375-.75/2.13WVF4 IC608
Item #: EH563408245
Brand: Iscar
Model #: 3408245
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Hi Temp Alloys | |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Application | Helical Interpolation | Plunging & Recessing | Rampdown | Shouldering | Slotting |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Corner Radius (RE) | 0″ |
| Overall Length (OAL) | 4″ |
| Grade | IC608 |
| Cutting Edge Material | Carbide |
| Tool Type | Solid carbide non center cutting endmills 90 Degrees |
| Coating | AlTiCrSiN |
| Maximum Feed per Tooth (fz(max)) | 0.0025 ″/tooth |
| Flute Count (NOF) | 5 |
| Minimum Feed per Tooth (fz(min)) | 0.001 ″/tooth |
| Shank Type | Weldon |
| Body Material | Carbide |
| End Shape | Corner Radius |
| Decimal Equivalent | 0.375″ |
| Usable Length (LU) | 2-1/8″ |
| Measurement Type | Inch |
$ 102.96
VFHVRBD0600R15N042 CARBIDE ENDMILL
Item #: MB03545756
Brand: Mitsubishi Materials USA
Model #: 545756
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Corner Radius (RE) | 1.5 mm |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Neck Diameter (DN) | 5.85 mm |
| Depth of Cut Maximum (APMX) | 9 mm |
| Peripheral Effective Cutting Edge Count (ZEFP) | 4 |
| Overall Length (OAL) | 90 mm |
| Length Group | Medium |
| Coating | VF |
| Measurement Type | Metric |
| End Shape | Corner Radius |
| Series/List # | VFHVRB |
| Usable Length (LU) | 42 mm |
$ 113.77
MS2MRBD0600R050 CARBIDE ENDMILL
Item #: MB03218237
Brand: Mitsubishi Materials USA
Model #: 218237
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| End Shape | Corner Radius |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Corner Radius (RE) | 0.5 mm |
| Depth of Cut Maximum (APMX) | 12 mm |
| Peripheral Effective Cutting Edge Count (ZEFP) | 2 |
| Overall Length (OAL) | 50 mm |
| Length Group | Medium |
| Coating | MS |
| Measurement Type | Metric |
| Flute Count (NOF) | 2 |
| Series/List # | MS2MRB |
| Flute Helix Angle (FHA) | 30 Degrees |
$ 113.83
7/16″ Dia. × 7/16″ Shank × 7/8″ DOC × 2-1/2″ OAL, Carbide TiAlN, Spiral , 2 Flute, CW Helix, Round, Ballnose End Mill
Item #: CE60C80952
Brand: Cleveland Twist Drill
Model #: C80952
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/16″ |
| Tool Type | End Mill |
| Connection Diameter Machine Side (DCONMS) | 7/16″ |
| Length Group | Regular |
| Depth of Cut Maximum (APMX) | 1″ |
| End Shape | Ball Nose |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.4375″ |
| Coating | TiAlN |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Series/List # | CEM-SE-2B-TA |
| Flute Helix Angle (FHA) | CW |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
$ 97.78
1/2″ × 1/2″ × 3″ × 5″ RHS / RHC HSS HSS Single End 2-Flute Center Cutting High Helix Finishing End Mill - TiCN
Item #: CE60C33539
Brand: Cleveland Twist Drill
Model #: C33539
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 3″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 5″ |
| Decimal Equivalent | 0.5″ |
| Cutting Edge Material | HSS |
| Measurement Type | Inch |
| Coating | TiCN |
| Series/List # | HGA-2-TC |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Weldon |
| Single / Double End | Single End |
| End Shape | Square |
$ 97.79
VF2XLD0020N006
Item #: MB03519030
Brand: Mitsubishi Materials USA
Model #: 519030
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.2 mm |
| Usable Length (LU) | 0.6 mm |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| Neck Diameter (DN) | 0.17 mm |
| Depth of Cut Maximum (APMX) | 0.3 mm |
| Body Half Taper Angle (BHTA) | 12 Degrees |
| Overall Length (OAL) | 45 mm |
| Peripheral Effective Cutting Edge Count (ZEFP) | 2 |
| Coating | VF |
| Length Group | Long - Necked |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | VF2XL |
| End Shape | Center Cutting |
$ 113.22
MP2SDBR0400
Item #: MB0310513002
Brand: Mitsubishi Materials USA
Model #: 10513002
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 8 mm |
| Usable Length (LU) | 24 mm |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Corner Radius (RE) | 4 mm |
| Depth of Cut Maximum (APMX) | 14 mm |
| Neck Diameter (DN) | 7.85 mm |
| Overall Length (OAL) | 90 mm |
| Length Group | Short |
| Coating | MS+ |
| End Shape | Ball Nose |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | MP2SDB |
$ 113.43
7809947 SUPREME LINE-UNIV
Item #: WC137809947
Brand: Walter-Prototyp
Model #: 7809947
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.313″ |
| Usable Length (LU) | 1/2″ |
| Connection Diameter Machine Side (DCONMS) | 0.313″ |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Super-Alloys / Titanium |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Grade | WK40TF |
| Overall Length (OAL) | 2-1/2″ |
| Tool Type | Square Endmill |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | TiAlN |
| Body Material | Carbide |
| Flute Count (NOF) | 4 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 50 Degrees |
| Series/List # | MC326 |
| Shank Type | Cylindrical |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.003937″ |
| End Shape | Square |
$ 106.05
RE1-.500.625.625Z7015W25
Item #: IC079592108
Brand: Ingersoll
Model #: 9592108
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | Helical Interpolation | Rampdown | Shouldering |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Ramping Angle Maximum (RMPX) | 1.5 Degrees |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Body Material | Steel |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.5″ |
| Flute Count (NOF) | 7 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 40 Degrees |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.015″ |
| End Shape | Square |
| Tool Cutting Edge Angle (KAPR) | 90 Degrees |
| Usable Length (LU) | 5/8″ |
$ 105.03
RE1-.500.625.625Z7030W25
Item #: IC079592109
Brand: Ingersoll
Model #: 9592109
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | Helical Interpolation | Rampdown | Shouldering |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Ramping Angle Maximum (RMPX) | 1.5 Degrees |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Body Material | Steel |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.5″ |
| Flute Count (NOF) | 7 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 40 Degrees |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.03″ |
| End Shape | Square |
| Tool Cutting Edge Angle (KAPR) | 90 Degrees |
| Usable Length (LU) | 5/8″ |
$ 105.03
RE1-.500.625.625Z7060W25
Item #: IC079592110
Brand: Ingersoll
Model #: 9592110
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | Helical Interpolation | Rampdown | Shouldering |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Ramping Angle Maximum (RMPX) | 1.5 Degrees |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Body Material | Steel |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.5″ |
| Flute Count (NOF) | 7 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 40 Degrees |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.06″ |
| End Shape | Square |
| Tool Cutting Edge Angle (KAPR) | 90 Degrees |
| Usable Length (LU) | 5/8″ |
$ 105.03
RE1-.500.625.625Z7090W25
Item #: IC079592111
Brand: Ingersoll
Model #: 9592111
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | Helical Interpolation | Rampdown | Shouldering |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Ramping Angle Maximum (RMPX) | 1.5 Degrees |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Body Material | Steel |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.5″ |
| Flute Count (NOF) | 7 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 40 Degrees |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.09″ |
| End Shape | Square |
| Tool Cutting Edge Angle (KAPR) | 90 Degrees |
| Usable Length (LU) | 5/8″ |
$ 105.03
End Mills for Composites - 0.2500″ (1/4″) Cutter Diameter × 1.2500″ (1-1/4″) Length of Cut Carbide Square Chipbreaker Cutter, 8 Flutes, Amorphous Diamond Coated
Item #: GE90889216C4
Brand: Harvey Tool
Model #: 889216-C4
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Flute Count (NOF) | 8 |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Length Group | 5D |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.25″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Amorphous Diamond |
$ 109.11
Miniature End Mills - Tapered Rib Cutters - 0.0900″ Cutter Diameter × 0.9000″ Length of Cut × 7° per side Carbide Tapered Square End Mill, 3 Flutes
Item #: GE9028090
Brand: Harvey Tool
Model #: 28090
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.09″ |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Depth of Cut Maximum (APMX) | 0.9″ |
| Coating | Uncoated |
| Flute Count (NOF) | 3 |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 4″ |
| End Shape | Square |
| Flute Helix Angle (FHA) | 14 Degrees |
| Measurement Type | Inch |
$ 108.40