BES 2023 $10+ Products - (25001 Products)
Dovetail Cutters - 0.1875″ (3/16″) Cutter Diameter 40° included Carbide Dovetail Cutter, 2 Flutes
Item #: GE90977812
Brand: Harvey Tool
Model #: 977812
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Coating | Uncoated |
| Overall Length (OAL) | 2″ |
| Style | Dovetail |
| Angle | 40 Degrees |
6 × 6 × 30 × 80 mm 6 Flute Square End Carbide End Mill-Plain Shank
Item #: YG34SEME7506030
Brand: YG-1 Cutting Tools
Model #: SEME7506030
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Flute Helix Angle (FHA) | 45 Degrees |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Shank Type | Plain |
| Depth of Cut Maximum (APMX) | 30 mm |
| End Shape | Square |
| Overall Length (OAL) | 80 mm |
| Decimal Equivalent | 0.2362″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Metric |
| Flute Count (NOF) | 6 |
Staggered Tooth - 0.1870″ (3/16″) Cutter Diameter × 0.0050″ Radius × 0.0470″ (3/64″) Width × 0.2810″ (9/32″) Neck Length Carbide Corner Radius Stagger Keyseat Cutter, 6 Flutes, AlTiN Coated
Item #: GE90943547C3
Brand: Harvey Tool
Model #: 943547-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Cutting Width (CW) | 3/64″ |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 2″ |
| Coating | AlTiN |
| Corner Radius (RE) | 0.005″ |
Staggered Tooth - 0.1870″ (3/16″) Cutter Diameter × 0.0100″ Radius × 0.0620″ (1/16″) Width × 0.2810″ (9/32″) Neck Length Carbide Corner Radius Stagger Keyseat Cutter, 6 Flutes, AlTiN Coated
Item #: GE90951762C3
Brand: Harvey Tool
Model #: 951762-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Cutting Width (CW) | 1/16″ |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 2″ |
| Coating | AlTiN |
| Corner Radius (RE) | 0.01″ |
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.2549NC
Item #: 29719200
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.2549NCProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+.00002/-.00000
Blank Number Wire Size
#1
Inner Diameter (Decimal Inch)
0.2549
Calibrated
Yes
Traceability Certification Included
NIST
Go/No Go
No Go
Standards
B47.1 Gage Standards; ASME B89.1.6
5/16 × 5/16 × 9/16(1_1/16) × 3_1/2 X-Power 2Fl Medium Ball Nose End Mill
Item #: YG33GM961020
Brand: YG-1 Cutting Tools
Model #: GM961020
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Usable Length (LU) | 1-1/16″ |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Applicable Material | Steel |
| Depth of Cut Maximum (APMX) | 9/16″ |
| Tool Type | Ballnose Endmill |
| Overall Length (OAL) | 3-1/2″ |
| Length Group | Medium |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | Y-Coating |
| Decimal Equivalent | 0.3125″ |
| Flute Count (NOF) | 2 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | GM961 |
| Shank Type | Plain |
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.2515NC
Item #: 29722790
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.2515NCProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+.00002/-.00000
Blank Number Wire Size
#1
Inner Diameter (Decimal Inch)
0.2515
Calibrated
Yes
Traceability Certification Included
NIST
Go/No Go
No Go
Standards
B47.1 Gage Standards; ASME B89.1.6
0.2 mm Dia. × 4 mm Shank × 0.16 mm DOC × 45 mm OAL, Carbide DURO, 2 Flute, Shrink Fit, Ballnose End Mill
Item #: TP463056111
Brand: OSG USA, Inc.
Model #: 3056111
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.2 mm |
| Corner Radius (RE) | 0.1 mm |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| Neck Diameter (DN) | 0.19 mm |
| Depth of Cut Maximum (APMX) | 0.16 mm |
| Neck Length (LN) | 2 mm |
| Overall Length (OAL) | 45 mm |
| Tool Type | Center Cut |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | DURO |
| Shank Standard | h6 |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Shank Type | Shrink Fit |
| Series/List # | 8590 |
4 mm Dia. × 6 mm Shank × 3.2 mm DOC × 90 mm OAL, Carbide DURO, 2 Flute, Shrink Fit, Ballnose End Mill
Item #: TP463056339
Brand: OSG USA, Inc.
Model #: 3056339
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 4 mm |
| Corner Radius (RE) | 2 mm |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Neck Diameter (DN) | 3.85 mm |
| Depth of Cut Maximum (APMX) | 3.2 mm |
| Neck Length (LN) | 45 mm |
| Overall Length (OAL) | 90 mm |
| Tool Type | Center Cut |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | DURO |
| Shank Standard | h6 |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Shank Type | Shrink Fit |
| Series/List # | 8590 |
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-0.2557NC
Item #: 29734217
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-0.2557NCProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+.00002/-.00000
Blank Number Wire Size
#1
Inner Diameter (Decimal Inch)
0.2557
Calibrated
Yes
Traceability Certification Included
NIST
Go/No Go
No Go
Standards
B47.1 Gage Standards; ASME B89.1.6
ECAI-B3 .375-.8/1.2C-3EC IC1508
Item #: EH563399004
Brand: Iscar
Model #: 3399004
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Applicable Material | | Non Ferrous Metals | |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Application | Helical Interpolation | Rampdown | Shouldering | Slotting |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Corner Radius (RE) | 0″ |
| Overall Length (OAL) | 3″ |
| Grade | IC1508 |
| Cutting Edge Material | Carbide |
| Tool Type | Solid carbide center cutting endmills 90 Degrees |
| Coating | DLC |
| Maximum Feed per Tooth (fz(max)) | 0.004 ″/tooth |
| Flute Count (NOF) | 3 |
| Minimum Feed per Tooth (fz(min)) | 0.003 ″/tooth |
| Shank Type | Round |
| Body Material | Carbide |
| End Shape | Corner Radius |
| Decimal Equivalent | 0.375″ |
| Usable Length (LU) | 1-1/4″ |
| Measurement Type | Inch |
VFHVRBD0400R10N012 CARBIDE ENDMILL
Item #: MB03528235
Brand: Mitsubishi Materials USA
Model #: 528235
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 4 mm |
| Corner Radius (RE) | 1 mm |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Neck Diameter (DN) | 3.9 mm |
| Depth of Cut Maximum (APMX) | 4 mm |
| Body Half Taper Angle (BHTA) | 15 Degrees |
| Overall Length (OAL) | 60 mm |
| Peripheral Effective Cutting Edge Count (ZEFP) | 4 |
| Coating | VF |
| Length Group | Medium |
| End Shape | Corner Radius |
| Measurement Type | Metric |
| Usable Length (LU) | 12 mm |
| Series/List # | VFHVRB |
VFHVRBD0400R05N012 SOLID CARB EM
Item #: MB03528315
Brand: Mitsubishi Materials USA
Model #: 528315
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 4 mm |
| Corner Radius (RE) | 0.5 mm |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Neck Diameter (DN) | 3.9 mm |
| Depth of Cut Maximum (APMX) | 4 mm |
| Body Half Taper Angle (BHTA) | 15 Degrees |
| Overall Length (OAL) | 60 mm |
| Peripheral Effective Cutting Edge Count (ZEFP) | 4 |
| Coating | VF |
| Length Group | Medium |
| End Shape | Corner Radius |
| Measurement Type | Metric |
| Usable Length (LU) | 12 mm |
| Series/List # | VFHVRB |
VFHVRBD0600R05N018 SOLID CARB EM
Item #: MB03528331
Brand: Mitsubishi Materials USA
Model #: 528331
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Corner Radius (RE) | 0.5 mm |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Neck Diameter (DN) | 5.85 mm |
| Depth of Cut Maximum (APMX) | 9 mm |
| Peripheral Effective Cutting Edge Count (ZEFP) | 4 |
| Overall Length (OAL) | 60 mm |
| Length Group | Medium |
| Coating | VF |
| Measurement Type | Metric |
| End Shape | Corner Radius |
| Series/List # | VFHVRB |
| Usable Length (LU) | 18 mm |
VFHVRBD0600R10N018 SOLID CARB EM
Item #: MB03528358
Brand: Mitsubishi Materials USA
Model #: 528358
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Corner Radius (RE) | 1 mm |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Neck Diameter (DN) | 5.85 mm |
| Depth of Cut Maximum (APMX) | 9 mm |
| Peripheral Effective Cutting Edge Count (ZEFP) | 4 |
| Overall Length (OAL) | 60 mm |
| Length Group | Medium |
| Coating | VF |
| Measurement Type | Metric |
| End Shape | Corner Radius |
| Series/List # | VFHVRB |
| Usable Length (LU) | 18 mm |
VFHVRBD0600R15N018 SOLID CARB EM
Item #: MB03528374
Brand: Mitsubishi Materials USA
Model #: 528374
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Corner Radius (RE) | 1.5 mm |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Neck Diameter (DN) | 5.85 mm |
| Depth of Cut Maximum (APMX) | 9 mm |
| Peripheral Effective Cutting Edge Count (ZEFP) | 4 |
| Overall Length (OAL) | 60 mm |
| Length Group | Medium |
| Coating | VF |
| Measurement Type | Metric |
| End Shape | Corner Radius |
| Series/List # | VFHVRB |
| Usable Length (LU) | 18 mm |
VFFDRBD0400 CATALOG SOLID CARB EM
Item #: MB03825387
Brand: Mitsubishi Materials USA
Model #: 825387
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 4 mm |
| Corner Radius (RE) | 0.5 mm |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Ramping Angle Maximum (RMPX) | 1.9 Degrees |
| Depth of Cut Maximum (APMX) | 0.25 mm |
| Neck Diameter (DN) | 3.8 mm |
| Overall Length (OAL) | 60 mm |
| Body Half Taper Angle (BHTA) | 15 Degrees |
| Coating | VF |
| Peripheral Effective Cutting Edge Count (ZEFP) | 4 |
| Flute Helix Angle (FHA) | 40 Degrees |
| Length Group | Long - Necked |
| End Shape | Corner Radius |
| Measurement Type | Metric |
| Usable Length (LU) | 12 mm |
| Series/List # | VFFDRB |
VFFDRBD0600 CATALOG SOLID CARB EM
Item #: MB03825395
Brand: Mitsubishi Materials USA
Model #: 825395
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Corner Radius (RE) | 0.6 mm |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Ramping Angle Maximum (RMPX) | 1.7 Degrees |
| Depth of Cut Maximum (APMX) | 0.36 mm |
| Neck Diameter (DN) | 5.6 mm |
| Overall Length (OAL) | 80 mm |
| Peripheral Effective Cutting Edge Count (ZEFP) | 4 |
| Coating | VF |
| Length Group | Long - Necked |
| Flute Helix Angle (FHA) | 40 Degrees |
| Measurement Type | Metric |
| End Shape | Corner Radius |
| Series/List # | VFFDRB |
| Usable Length (LU) | 18 mm |
MS2XL6D0200N100 CARBIDE ENDMILL
Item #: MB03219416
Brand: Mitsubishi Materials USA
Model #: 219416
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 2 mm |
| Usable Length (LU) | 10 mm |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Neck Diameter (DN) | 1.9 mm |
| Depth of Cut Maximum (APMX) | 3 mm |
| Body Half Taper Angle (BHTA) | 15 Degrees |
| Overall Length (OAL) | 50 mm |
| Peripheral Effective Cutting Edge Count (ZEFP) | 2 |
| Coating | MS |
| Length Group | Long - Necked |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | MS2XL6 |
| End Shape | Square |
1/2″ × 1/2″ × 1″ × 3-1/4″ RHS / RHC HSS HSS Single End 2-Flute Center Cutting Keyway Tolerance Finishing End Mill - TiN
Item #: CE60C38943
Brand: Cleveland Twist Drill
Model #: C38943
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 1″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 3-1/4″ |
| Style | Keyway |
| Cutting Edge Material | HSS |
| Decimal Equivalent | 0.5″ |
| Coating | TiN |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Series/List # | HG-2K-TN |
| Shank Type | Weldon |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Square |
| Single / Double End | Single End |