BES Up To 2022 $250-$5000 Products - (25001 Products)
Diamond End Mills for Non-Ferrous Materials - PCD Diamond - 0.1250″ (1/8″) Cutter Diameter × 0.2500″ (1/4″) Length of Cut PCD Square End Mill, Flute
Item #: GE9012108
Brand: Harvey Tool
Model #: 12108
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Flute Count (NOF) | 1 |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Applicable Material | Aluminum / Non-Ferrous Materials |
| Overall Length (OAL) | 1-1/2″ |
| Tool Type | Single-End|Non-Center Cutting |
| Cutting Edge Material | PCD |
| Decimal Equivalent | 0.125″ |
| Coating | Diamond |
$ 290.52
Diamond End Mills for Non-Ferrous Materials - PCD Diamond - 0.1180″ Cutter Diameter × 0.2500″ (1/4″) Length of Cut PCD Square End Mill, Flute
Item #: GE901213M
Brand: Harvey Tool
Model #: 1213M
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.118″ |
| Flute Count (NOF) | 1 |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Applicable Material | Aluminum / Non-Ferrous Materials |
| Overall Length (OAL) | 1-1/2″ |
| Tool Type | Single-End|Non-Center Cutting |
| Cutting Edge Material | PCD |
| Decimal Equivalent | 0.118″ |
| Coating | Diamond |
$ 290.52
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-1.7786M
Item #: 40002610
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-1.7786M
Product Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00002/-0.00002
Blank Number Wire Size
#6
Inner Diameter (Decimal Inch)
1.7786
Calibrated
No
Traceability Certification Included
No
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
$ 1,100.73
Precision Cutting Tools 224 SERIES 2 FLUTE FOR ALUMINUM & NON FERROUS MATERIALS
Item #: CW8056060
Brand: Precision Cutting Tools
Model #: 9581416
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Grade | A5005 Exxtral Carbon (DLC) |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Peripheral Effective Cutting Edge Count (ZEFP) | 2 |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 4″ |
| Maximum Feed per Tooth (fz(max)) | 0.008 ″/tooth |
| Cutting Edge Material | Carbide |
| Minimum Feed per Tooth (fz(min)) | 0.004 ″/tooth |
| Coating | Ta-C |
| Length Group | Standard |
| Flute Count (NOF) | 2 |
| Shank Standard | h6 |
| Flute Helix Angle (FHA) | 45 Degrees |
| Body Material | Carbide |
| Shank Type | Round |
| Decimal Equivalent | 0.75″ |
| End Shape | Corner Radius |
| Measurement Type | Inch |
| Usable Length (LU) | 1-5/8″ |
| Series/List # | 224 |
| Application | | Finish | HEM | Semi Finish | |
| Shank Size (SS) | 3/4″ |
| Corner Radius (RE) | 0.015″ |
$ 257.39
Diamond End Mills for Non-Ferrous Materials - PCD Diamond - 0.0930″ (3/32″) Cutter Diameter × 0.1870″ (3/16″) Length of Cut PCD Square End Mill, Flute
Item #: GE9012106
Brand: Harvey Tool
Model #: 12106
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/32″ |
| Flute Count (NOF) | 1 |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 3/8″ |
| Applicable Material | Aluminum / Non-Ferrous Materials |
| Overall Length (OAL) | 1-1/2″ |
| Tool Type | Single-End|Non-Center Cutting |
| Cutting Edge Material | PCD |
| Decimal Equivalent | 0.09375″ |
| Coating | Diamond |
$ 290.52
16931 25MMX25MMX38MM
Item #: CR1016931
Brand: Melin Tool Co
Model #: 16931
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 25 mm |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 25 mm |
| Tool Type | General Purpose |
| Depth of Cut Maximum (APMX) | 38 mm |
| Decimal Equivalent | 0.9843″ |
| Overall Length (OAL) | 100 mm |
| Series/List # | AMG |
| Cutting Edge Material | Carbide |
$ 272.75
16800 25MMX25MMX38MM
Item #: CR1016800
Brand: Melin Tool Co
Model #: 16800
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 25 mm |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 25 mm |
| Tool Type | General Purpose |
| Depth of Cut Maximum (APMX) | 38 mm |
| Decimal Equivalent | 0.9843″ |
| Overall Length (OAL) | 100 mm |
| Series/List # | CCMG |
| Cutting Edge Material | Carbide |
$ 283.94
TEFS120B44-26W12-83C GH730
Item #: TG435668352
Brand: Tungaloy
Model #: 5668352
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 12 mm |
| Applicable Material | | Steel | Stainless Steel | |
| Connection Diameter Machine Side (DCONMS) | 12 mm |
| Application | | Shoulder Milling | |
| Depth of Cut Maximum (APMX) | 26 mm |
| Corner Chamfer Width (CHW) | 0.4 mm |
| Overall Length (OAL) | 83 mm |
| Grade | GH730 |
| Cutting Edge Material | Carbide |
| Tool Type | Solid carbide center cutting endmills 90 |
| Coating | TiCNO |
| Maximum Feed per Tooth (fz(max)) | 0.1 mm/tooth |
| Flute Count (NOF) | 4 |
| Minimum Feed per Tooth (fz(min)) | 0.04 mm/tooth |
| Shank Type | Round |
| Body Material | Carbide |
| End Shape | Chamfer |
| Measurement Type | Metric |
$ 249.78
FM-205-20-090-DLC 0.625-I
Item #: RJ4016670
Brand: Robb Jack
Model #: FM-205-20-090-DLC
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| End Shape | Corner Radius |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Usable Length (LU) | 3-1/8″ |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Corner Radius (RE) | 0.09″ |
| Overall Length (OAL) | 6″ |
| Tool Type | Solid Carbide Endmill |
| Coating | DLC |
| Decimal Equivalent | 0.625″ |
| Flute Count (NOF) | 2 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 40 Degrees |
| Series/List # | FM-205 |
$ 0.00
MFM-304-16-400-DLC 16MM D
Item #: RJ4043310
Brand: Robb Jack
Model #: MFM-304-16-400-DLC
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 16 mm |
| End Shape | Corner Radius |
| Connection Diameter Machine Side (DCONMS) | 16 mm |
| Usable Length (LU) | 80 mm |
| Depth of Cut Maximum (APMX) | 17 mm |
| Corner Radius (RE) | 4 mm |
| Overall Length (OAL) | 130 mm |
| Tool Type | Solid Carbide Endmill |
| Coating | DLC |
| Measurement Type | Metric |
| Flute Count (NOF) | 3 |
| Series/List # | MFM-304 |
| Flute Helix Angle (FHA) | 40 Degrees |
$ 267.31
MFM-204-16-300-DLC 16MM D
Item #: RJ4042250
Brand: Robb Jack
Model #: MFM-204-16-300-DLC
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 16 mm |
| Flute Helix Angle (FHA) | 40 Degrees |
| Connection Diameter Machine Side (DCONMS) | 16 mm |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 17 mm |
| Corner Radius (RE) | 3 mm |
| Overall Length (OAL) | 130 mm |
| Tool Type | Solid Carbide Endmill |
| Coating | DLC |
| Measurement Type | Metric |
| Flute Count (NOF) | 2 |
| Series/List # | MFM-204 |
$ 267.31
MFM-204-16-400-DLC 16MM D
Item #: RJ4042260
Brand: Robb Jack
Model #: MFM-204-16-400-DLC
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 16 mm |
| Flute Helix Angle (FHA) | 40 Degrees |
| Connection Diameter Machine Side (DCONMS) | 16 mm |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 17 mm |
| Corner Radius (RE) | 4 mm |
| Overall Length (OAL) | 130 mm |
| Tool Type | Solid Carbide Endmill |
| Coating | DLC |
| Measurement Type | Metric |
| Flute Count (NOF) | 2 |
| Series/List # | MFM-204 |
$ 267.31
FM-205-20-120-DLC 0.625-I
Item #: RJ4016680
Brand: Robb Jack
Model #: FM-205-20-120-DLC
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| End Shape | Corner Radius |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Usable Length (LU) | 3-1/8″ |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Corner Radius (RE) | 0.12″ |
| Overall Length (OAL) | 6″ |
| Tool Type | Solid Carbide Endmill |
| Coating | DLC |
| Decimal Equivalent | 0.625″ |
| Flute Count (NOF) | 2 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 40 Degrees |
| Series/List # | FM-205 |
$ 267.31
FM-305-20-090-DLC 0.625-I
Item #: RJ4018030
Brand: Robb Jack
Model #: FM-305-20-090-DLC
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| End Shape | Corner Radius |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Usable Length (LU) | 3-1/8″ |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Corner Radius (RE) | 0.09″ |
| Overall Length (OAL) | 6″ |
| Tool Type | Solid Carbide Endmill |
| Coating | DLC |
| Decimal Equivalent | 0.625″ |
| Flute Count (NOF) | 3 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 40 Degrees |
| Series/List # | FM-305 |
$ 267.31
MFM-304-16-300-DLC 16MM D
Item #: RJ4043300
Brand: Robb Jack
Model #: MFM-304-16-300-DLC
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 16 mm |
| End Shape | Corner Radius |
| Connection Diameter Machine Side (DCONMS) | 16 mm |
| Usable Length (LU) | 80 mm |
| Depth of Cut Maximum (APMX) | 17 mm |
| Corner Radius (RE) | 3 mm |
| Overall Length (OAL) | 130 mm |
| Tool Type | Solid Carbide Endmill |
| Coating | DLC |
| Measurement Type | Metric |
| Flute Count (NOF) | 3 |
| Series/List # | MFM-304 |
| Flute Helix Angle (FHA) | 40 Degrees |
$ 267.31
FM-305-20-120-DLC 0.625-I
Item #: RJ4018040
Brand: Robb Jack
Model #: FM-305-20-120-DLC
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| End Shape | Corner Radius |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Usable Length (LU) | 3-1/8″ |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Corner Radius (RE) | 0.12″ |
| Overall Length (OAL) | 6″ |
| Tool Type | Solid Carbide Endmill |
| Coating | DLC |
| Decimal Equivalent | 0.625″ |
| Flute Count (NOF) | 3 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 40 Degrees |
| Series/List # | FM-305 |
$ 267.31
5/8 End Mill 6FL .120R TX - T-CARB 5/8x5/8x1-5/8x3-1/2
Item #: DD9235120
Brand: KYOCERA SGS Precision Tools
Model #: 35120
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Usable Length (LU) | 1-7/8″ |
| Overall Length (OAL) | 3-1/2″ |
| Corner Radius (RE) | 0.12″ |
| Cutting Edge Material | Carbide |
| Flute Type | Spiral |
| Coating | AlTiN |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 6 |
| Decimal Equivalent | 0.625″ |
| Flute Helix Angle (FHA) | 41 Degrees |
| Series/List # | T-CARB |
$ 282.51
16.0 End Mill 6FL SQ TX - T-CARB 16x16x32x92
Item #: DD9245104
Brand: KYOCERA SGS Precision Tools
Model #: 45104
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 16 mm |
| End Shape | Square |
| Connection Diameter Machine Side (DCONMS) | 16 mm |
| Usable Length (LU) | 60 mm |
| Depth of Cut Maximum (APMX) | 32 mm |
| Corner Radius (RE) | None |
| Overall Length (OAL) | 92 mm |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | AlTiN |
| Decimal Equivalent | 0.6299″ |
| Flute Count (NOF) | 6 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 41 Degrees |
| Series/List # | T-CARB |
| Shank Type | Round |
$ 282.08
3/4″ × 3/4″ × 1-5/8″ × 3-7/8″ RHS / RHC HSS-E (PM) Powder Metal Course Profile Roughing End Mill - MF SE NCC - TiN
Item #: CE60C32225
Brand: Cleveland
Model #: C32225
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Application | Roughing |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Flute Type | Spiral | Coarse |
| Overall Length (OAL) | 3-7/8″ |
| Decimal Equivalent | 0.75″ |
| Cutting Edge Material | HSSPM |
| Measurement Type | Inch |
| Coating | TiN |
| Series/List # | PMRC-TN |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Weldon |
| Single / Double End | Single End |
| End Shape | Square |
| Trade Name | PM-Plus |
$ 267.05
5/8″ × 5/8″ × 1-5/8″ × 4″ RHS / RHC Solid Carbide 2-Flute Square End High-Performance End Mill for Aluminum - Bright
Item #: CE60C60500
Brand: Cleveland
Model #: C60500
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Applicable Material | Aluminum / Non-Ferrous Materials |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Length Group | Regular |
| Overall Length (OAL) | 4″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.625″ |
| Coating | Bright |
| Measurement Type | Inch |
| Flute Count (NOF) | 2 |
| Series/List # | CEM-AM2 |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Square |
| Single / Double End | Single End |
$ 267.05