2 - Air Hardening Flat Stock

Item #: LY561612
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: A-2 *Thick: 1/4 *Width: 2-1/2

Description:
*A-2 Air Hardening Ground Flat Stock 36" Length *Made from fine grain, electric furnace air-hardening, 5 chrome tool steel *Has excellent wear and abrasion resistance properties *Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections. *Low sulphur content makes it non-freemachining. *HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately. *Tolerance Thickness ±.001" Width +.000/.005" *Larger Sizes A-2 available thru 1" thickness *Oversize tolerances available thru 2" thickness *Many other types of gage stock available *Modified Nutec 42 *A-6 Diecrat *D-2 Aristocrat *S-7 *C-1018 Marshallcrat low carbon

Shipping Info:
*Actual Weight - 6.4500

$ 155.32

18 x 9/16 x 1 - Oil Hardening Flat Stock

Item #: LY5003603
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: O-1 *Thick: 9/16 *Width: 1

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 2.8960

$ 76.18

36 x 1/8 x 5/8 - Oil Hardening Flat Stock

Item #: LY5100803
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1/8 *Width: 5/8

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - .8500 *Dimensions - Height: .160 Length: 37.2 Width: 1.50

$ 32.99

24 x 3/8 x 1-1/4 - Low Carbon Flat Stock

Item #: LY8000137
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 24 *Material: Low Carbon *Thick: 3/8 *Width: 1-1/4

Description:
*Low-Carbon 24" Length Ground Flat Stock *A fine-grained, vacuum-degassed carbon steel *Easily machined, has excellent weldability and responds uniformly to case hardening *Manganese content provides greater strength and hardness compared to many other carbon steels *Often used in its natural state for such applications as backup plate, stripper plates, punch pads and machine parts *Used for jigs, fixtures, cams and patterns *Hardening: CARBURIZING: For maximum depth of hardening, 1/21", hold in carburizing salt at 1700?F for 3 hours. CASE HARDENING: Hold in sodium cyanide salt bath at 1500?F for 30 minutes. Maximum case is .006"

Shipping Info:
*Actual Weight - 3.2300

$ 75.55

36 x 3/64 x 3/4 - Oil Hardening Flat Stock

Item #: LY5100302
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 3/64 *Width: 3/4

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - .3600

$ 41.20

24 x 1/4 x 6 - Low Carbon Flat Stock

Item #: LY8000168
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 24 *Material: Low Carbon *Thick: 1/4 *Width: 6

Description:
*Low-Carbon 24" Length Ground Flat Stock *A fine-grained, vacuum-degassed carbon steel *Easily machined, has excellent weldability and responds uniformly to case hardening *Manganese content provides greater strength and hardness compared to many other carbon steels *Often used in its natural state for such applications as backup plate, stripper plates, punch pads and machine parts *Used for jigs, fixtures, cams and patterns *Hardening: CARBURIZING: For maximum depth of hardening, 1/21", hold in carburizing salt at 1700?F for 3 hours. CASE HARDENING: Hold in sodium cyanide salt bath at 1500?F for 30 minutes. Maximum case is .006"

Shipping Info:
*Actual Weight - 10.3200

$ 190.50

18 x 1/2 x 4-1/2 - Oil Hardening Flat Stock

Item #: LY5003212
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: O-1 *Thick: 1/2 *Width: 4-1/2

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 11.7200

$ 194.29

36 x 1/4 x 12 - Oil Hardening Flat Stock

Item #: LY5101623
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1/4 *Width: 12

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 30.9200

$ 529.25

18 x 1/8 x 7 - Oil Hardening Flat Stock

Item #: LY5000817
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: O-1 *Thick: 1/8 *Width: 7

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 4.5100

$ 135.08

36 x 1-1/4 x 2 - Oil Hardening Flat Stock

Item #: LY5111603
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 1-1/4 *Width: 2

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 25.6100

$ 380.26

18 x 3/16 x 3/4 - Oversize Air Hardening Flat Stock

Item #: LY701203
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: A-2 *Thick: 3/16 *Width: 3/4

Description:
*Oversize A-2 Air Hardening Ground Flat Stock

Shipping Info:
*Actual Weight - .7900

$ 33.59

18 x 1/16 x 3-1/2 - Oil Hardening Flat Stock

Item #: LY5000410
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: O-1 *Thick: 1/16 *Width: 3-1/2

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 1.1780

$ 54.04

36 x 5/32 x 3-1/2 - Oil Hardening Flat Stock

Item #: LY5101011
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 5/32 *Width: 3-1/2

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 5.6400

$ 133.70

36 x 5/32 x 8 - Oil Hardening Flat Stock

Item #: LY5101015
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 36 *Material: O-1 *Thick: 5/32 *Width: 8

Description:
*Precision Ground 0-1 Gage Stock 36" Length *O-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 12.8900

$ 320.33

18 x 1-1/4 x 1-1/2 - Oil Hardening Flat Stock

Item #: LY5011602
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: O-1 *Thick: 1-1/4 *Width: 1-1/2

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 9.8000

$ 184.75

18 x 7/16 x 1-1/4 - Oil Hardening Flat Stock

Item #: LY5002805
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: O-1 *Thick: 7/16 *Width: 1-1/4

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 3.2600

$ 70.90

18 x 1/2 x 3-1/2 - Oil Hardening Flat Stock

Item #: LY5003210
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: O-1 *Thick: 1/2 *Width: 3-1/2

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 9.0080

$ 157.84

18 x 3/32 x 1-1/4 - Air Hardening Flat Stock

Item #: LY55604
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: A-2 *Thick: 3/32 *Width: 1-1/4

Description:
*A-2 Air Hardening Ground Flat Stock 18" Length *Made from fine grain, electric furnace air-hardening, 5 chrome tool steel *Has excellent wear and abrasion resistance properties *Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections. *Low sulphur content makes it non-freemachining. *HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately. *Tolerance Thickness ±.001" Width +.000/.005" *Larger Sizes A-2 available thru 1" thickness *Oversize tolerances available thru 2" thickness *Many other types of gage stock available *Modified Nutec 42 *A-6 Diecrat *D-2 Aristocrat *S-7 *C-1018 Marshallcrat low carbon

Shipping Info:
*Actual Weight - .6100

$ 40.02

18 x 1/2 x 1/2 - Oil Hardening Flat Stock

Item #: LY4054147
Manufacturer: Starrett
Mfg #: 54147

Technical Specifications:
*Brand Name: Starrett *Length: 18 *Material: O-1 *Thick: 1/2 *Width: 1/2

Description:
*Precision Ground 0-1 Gage Stock 18" Length *0-1 Oil Hardening Ground Flat Stock *Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure *Non-shrinking general purpose tool steel *HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately. *Tolerance Thickness ±.001" Width +.000 / .005"

Shipping Info:
*Actual Weight - 1.2900

$ 75.79

18 x 3/32 x 4 - Air Hardening Flat Stock

Item #: LY55609
Manufacturer: Generic USA
Mfg #:

Technical Specifications:
*Brand Name: Generic USA *Length: 18 *Material: A-2 *Thick: 3/32 *Width: 4

Description:
*A-2 Air Hardening Ground Flat Stock 18" Length *Made from fine grain, electric furnace air-hardening, 5 chrome tool steel *Has excellent wear and abrasion resistance properties *Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections. *Low sulphur content makes it non-freemachining. *HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately. *Tolerance Thickness ±.001" Width +.000/.005" *Larger Sizes A-2 available thru 1" thickness *Oversize tolerances available thru 2" thickness *Many other types of gage stock available *Modified Nutec 42 *A-6 Diecrat *D-2 Aristocrat *S-7 *C-1018 Marshallcrat low carbon

Shipping Info:
*Actual Weight - 1.9300

$ 104.13