Clamping & Fixturing Tools For Sale | Exact Tooling - (10721 Products)
36 x 5/32 x 3 - Oil Hardening Flat Stock
Item #: LY5101010
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 5/32
*Width: 3
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 4.9520
36 x 5/32 x 6 - Oil Hardening Flat Stock
Item #: LY5101014
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 5/32
*Width: 6
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 9.7460
18 x 1-1/4 x 1-1/4 - Oil Hardening Flat Stock
Item #: LY5011601
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: O-1
*Thick: 1-1/4
*Width: 1-1/4
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 8.0680
36 x 3/16 x 5 - Oil Hardening Flat Stock
Item #: LY5101213
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 3/16
*Width: 5
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 9.7240
36 x 3/16 x 2-1/2 - Oversize Oil Hardening Flat Stock
Item #: LY651209
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 3/16
*Width: 2-1/2
Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock
*Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis
*Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools
*Width +.010/.015
*Thickness +10.010/.015
*Squareness edge to surface .003 per inch of thickness
*Finish 10-25 micro inches
Shipping Info:
*Actual Weight - 5.1800
36 x 3/8 x 1-3/4 - Oil Hardening Flat Stock
Item #: LY5102408
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 3/8
*Width: 1-3/4
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 6.9200
*Dimensions - Height: .375 Length: 36.0 Width: 1.75
5/8 x 1-1/2 x 18 - Oversize Air Hardening Flat Stock
Item #: LY4657208
Manufacturer: Starrett
Mfg #: 57208
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 5/8
*Width: 1-1/2
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 4.7800
36 x 3/32 x 2 - Oil Hardening Flat Stock
Item #: LY5100606
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 3/32
*Width: 2
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 1.6840
36 x 3/16 x 1/2 - Air Hardening Flat Stock
Item #: LY561202
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: A-2
*Thick: 3/16
*Width: 1/2
Description:
*A-2 Air Hardening Ground Flat Stock 36" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - .9700
36 x 1/4 x 1 - Oversize Air Hardening Flat Stock
Item #: LY751604
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: A-2
*Thick: 1/4
*Width: 1
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 2.7400
18 x 3/8 x 1 - Oversize Oil Hardening Flat Stock
Item #: LY602404
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: O-1
*Thick: 3/8
*Width: 1
Description:
*Oversize 0-1 Oil Hardening Ground Flat Stock
*Flat Ground Stock is manufactured from fine grain tool steel, electrically melted from high grade materials to close limits of analysis
*Ideal for the manufacture of dies, gages, punches, templates, jigs and precision tools
*Width +.010/.015
*Thickness +10.010/.015
*Squareness edge to surface .003 per inch of thickness
*Finish 10-25 micro inches
Shipping Info:
*Actual Weight - 2.0200
36 x 3/16 x 1-1/4 - Air Hardening Flat Stock
Item #: LY561205
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: A-2
*Thick: 3/16
*Width: 1-1/4
Description:
*A-2 Air Hardening Ground Flat Stock 36" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - 2.4200
18 x 5/64 x 4 - Oil Hardening Flat Stock
Item #: LY5000508
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: O-1
*Thick: 5/64
*Width: 4
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 1.6000
*Dimensions - Height: .100 Length: 19.0 Width: 4.00
18 x 1/2 x 3/4 - Air Hardening Flat Stock
Item #: LY553203
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: A-2
*Thick: 1/2
*Width: 3/4
Description:
*A-2 Air Hardening Ground Flat Stock 18" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - 1.9400
36 x 1 x 1-1/2 - Oil Hardening Flat Stock
Item #: LY5110003
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 1
*Width: 1-1/2
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 15.5900
18 x 9/64 x 3 - Oil Hardening Flat Stock
Item #: LY5000907
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: O-1
*Thick: 9/64
*Width: 3
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 2.2280
18 x 5/8 x 2-1/2 - Oil Hardening Flat Stock
Item #: LY5004007
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: O-1
*Thick: 5/8
*Width: 2-1/2
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 8.0780
36 x 3/16 x 4 - Oil Hardening Flat Stock
Item #: LY5101212
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 3/16
*Width: 4
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 7.8500
*Dimensions - Height: .210 Length: 37.2 Width: 4.75
18 x 5/8 x 3/4 - Oil Hardening Flat Stock
Item #: LY5004002
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: O-1
*Thick: 5/8
*Width: 3/4
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 2.4500
*Dimensions - Height: .650 Length: 19.5 Width: 2.00
18 x 3/8 x 5 - Oil Hardening Flat Stock
Item #: LY5002415
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: O-1
*Thick: 3/8
*Width: 5
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 9.7180