ET01 and ET02 - (25001 Products)
3/4 x 3 x 36 - Air Hardening Flat Stock
Item #: LY4554688
Manufacturer: Starrett
Mfg #: 54688
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 3/4
*Width: 3
Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Standard size: +/-.001" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*Ground straight and parallel
Shipping Info:
*Actual Weight - 22.9500
1/2 x 5 x 36 - 496 Oil Hardening Precsision Ground Flat Stock
Item #: LY4156867
Manufacturer: Starrett
Mfg #: 56867
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 1/2
*Width: 5
Description:
*AISI 01 oil hardening tool steel. Standard size: +/-.001" thickness tolerance
*Dimensionally stable -- can be used for intricate work including thin sections, with a minimum danger of cracking
*Ground straight and parallel
Shipping Info:
*Actual Weight - 26.4700
1/2 x 10 x 24 - 498 Low Carbon Precision Ground Flat Stock
Item #: LY8054998
Manufacturer: Starrett
Mfg #: 54998
Technical Specifications:
*Brand Name: Starrett
*Length: 24
*Material: LC
*Thick: 1/2
*Width: 10
Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost
* Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
*This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
*Furnished in 24" (610mm) lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 34.0000
36 x 1/8 x 14 - Oil Hardening Flat Stock
Item #: LY4057238
Manufacturer: Starrett
Mfg #: 57238
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 1/8
*Width: 14
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 18.0400
1-1/2 x 2-1/2 x 18 - Oversize Air Hardening Flat Stock
Item #: LY4657666
Manufacturer: Starrett
Mfg #: 57666
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 1-1/2
*Width: 2-1/2
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 19.1200
18 x 1-1/8 x 6 - Oil Hardening Flat Stock
Item #: LY4054229
Manufacturer: Starrett
Mfg #: 54229
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: O-1
*Thick: 1-1/8
*Width: 6
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 34.7900
7/8 x 5 x 18 - Oversize Air Hardening Flat Stock
Item #: LY4657644
Manufacturer: Starrett
Mfg #: 57644
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 7/8
*Width: 5
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 22.3100
1 x 2 x 36 - High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4269361
Manufacturer: Starrett
Mfg #: 69361
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: D-2
*Thick: 1
*Width: 2
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 20.4000
1 x 2 x 36 - Oversize High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4369589
Manufacturer: Starrett
Mfg #: 69589
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: D-2
*Thick: 1
*Width: 2
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 20.4000
1-1/4 x 1-1/4 x 36 - Oversize Air Hardening Flat Stock
Item #: LY4657468
Manufacturer: Starrett
Mfg #: 57468
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 1-1/4
*Width: 1-1/4
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 15.9400
36 x 1/2 x 10 - Oil Hardening Flat Stock
Item #: LY5103217
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 1/2
*Width: 10
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 51.5400
1/4 x 12 x 18 - Oversize Air Hardening Flat Stock
Item #: LY4657588
Manufacturer: Starrett
Mfg #: 57588
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 1/4
*Width: 12
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 15.3000
1-1/2X10X24 CARBON FLAT STOCK
Item #: LY8005690
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
Description:
Shipping Info:
*Actual Weight - 103.2100
1/2 x 1 x 36 - A6 Air Hardening Precision Ground Flat Stock
Item #: LY4459057
Manufacturer: Starrett
Mfg #: 59057
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-6
*Thick: 1/2
*Width: 1
Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance
*Lower heat treating temperature results in deep hardness and minimum distortion
Shipping Info:
*Actual Weight - 5.1000
1-1/4X12X24 CARBON FLAT STOCK
Item #: LY8003930
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
Description:
Shipping Info:
*Actual Weight - 103.2000
1-1/4 x 3 x 18 - Oversize Air Hardening Flat Stock
Item #: LY4657660
Manufacturer: Starrett
Mfg #: 57660
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 1-1/4
*Width: 3
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 19.1200
1/8 x 10 x 36 - Air Hardening Flat Stock
Item #: LY4557323
Manufacturer: Starrett
Mfg #: 57323
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 1/8
*Width: 10
Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Standard size: +/-.001" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*Ground straight and parallel
Shipping Info:
*Actual Weight - 12.7500
3/8 x 2-1/2 x 36 - A6 Air Hardening Precision Ground Flat Stock
Item #: LY4459042
Manufacturer: Starrett
Mfg #: 59042
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-6
*Thick: 3/8
*Width: 2-1/2
Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance
*Lower heat treating temperature results in deep hardness and minimum distortion
Shipping Info:
*Actual Weight - 9.5600
36 x 1 x 4-1/2 - Oil Hardening Flat Stock
Item #: LY5110009
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 1
*Width: 4-1/2
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 46.2500
1 x 2 x 36 - Oversize Air Hardening Flat Stock
Item #: LY4656955
Manufacturer: Starrett
Mfg #: 56955
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 1
*Width: 2
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 20.4000