ET01 and ET02 - (25001 Products)
5/8 x 2 x 18 - Oversize Air Hardening Flat Stock
Item #: LY4657209
Manufacturer: Starrett
Mfg #: 57209
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 5/8
*Width: 2
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 6.3700
1-1/2X2-1/2X24 CARBON FLAT STOCK
Item #: LY8003980
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
Description:
Shipping Info:
*Actual Weight - 25.8200
18 x 1-1/4 x 1-1/2 - Oil Hardening Flat Stock
Item #: LY4054231
Manufacturer: Starrett
Mfg #: 54231
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: O-1
*Thick: 1-1/4
*Width: 1-1/2
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 9.6800
1/16 x 1-3/4 x 36 - A6 Air Hardening Precision Ground Flat Stock
Item #: LY4458917
Manufacturer: Starrett
Mfg #: 58917
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-6
*Thick: 1/16
*Width: 1-3/4
Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance
*Lower heat treating temperature results in deep hardness and minimum distortion
Shipping Info:
*Actual Weight - 1.1200
18 x 1-1/4 x 3 - Oil Hardening Flat Stock
Item #: LY5011605
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: O-1
*Thick: 1-1/4
*Width: 3
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 19.3550
18 x 1 x 4 - Oil Hardening Flat Stock
Item #: LY5010008
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: O-1
*Thick: 1
*Width: 4
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 20.9850
36 x 1/4 x 5 - Oversize Air Hardening Flat Stock
Item #: LY751617
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: A-2
*Thick: 1/4
*Width: 5
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 13.5600
1/8 x 7 x 18 - Air Hardening Flat Stock
Item #: LY4557509
Manufacturer: Starrett
Mfg #: 57509
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 1/8
*Width: 7
Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Standard size: +/-.001" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*Ground straight and parallel
Shipping Info:
*Actual Weight - 4.4600
1/4 x 2 x 36 - High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4269292
Manufacturer: Starrett
Mfg #: 69292
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: D-2
*Thick: 1/4
*Width: 2
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 5.1000
36 x 3/8 x 1-1/2 - Air Hardening Flat Stock
Item #: LY4554645
Manufacturer: Starrett
Mfg #: 54645
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 3/8
*Width: 1-1/2
Description:
*A-2 Air Hardening Ground Flat Stock 36" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - 5.8100
36 x 3/8 x 1-1/2 - Oversize Air Hardening Flat Stock
Item #: LY4656921
Manufacturer: Starrett
Mfg #: 56921
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 3/8
*Width: 1-1/2
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 6.0400
3/32 x 1-1/4 x 36 - A6 Air Hardening Precision Ground Flat Stock
Item #: LY4458933
Manufacturer: Starrett
Mfg #: 58933
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-6
*Thick: 3/32
*Width: 1-1/4
Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance
*Lower heat treating temperature results in deep hardness and minimum distortion
Shipping Info:
*Actual Weight - 1.2000
36 x 3/4 x 2-1/2 - Oil Hardening Flat Stock
Item #: LY5104806
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 3/4
*Width: 2-1/2
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 19.6300
18 x 3/4 x 5 - Oil Hardening Flat Stock
Item #: LY5004811
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: O-1
*Thick: 3/4
*Width: 5
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 19.3450
36 x 5/8 x 1-1/2 - Oil Hardening Flat Stock
Item #: LY4054465
Manufacturer: Starrett
Mfg #: 54465
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 5/8
*Width: 1-1/2
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 9.6800
18 x 5/8 x 6 - Oil Hardening Flat Stock
Item #: LY5004012
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: O-1
*Thick: 5/8
*Width: 6
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 19.5000
*Dimensions - Height: .650 Length: 18.5 Width: 6.00
36 x 1-1/4 x 1-1/4 - Oil Hardening Flat Stock
Item #: LY5111601
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 1-1/4
*Width: 1-1/4
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 16.2300
3/32 x 3 x 36 - High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4269250
Manufacturer: Starrett
Mfg #: 69250
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: D-2
*Thick: 3/32
*Width: 3
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 2.8700
36 x 1/8 x 4 - Oversize Air Hardening Flat Stock
Item #: LY4657364
Manufacturer: Starrett
Mfg #: 57364
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 1/8
*Width: 4
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 5.6900
3/16 x 5 x 18 - Oversize High Carbon, High Chromium Precision Ground Flat Stock
Item #: LY4369398
Manufacturer: Starrett
Mfg #: 69398
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: D-2
*Thick: 3/16
*Width: 5
Description:
*401 is (AISI D2) high chromium steel for the highest wear resistance applications
*Standard size: +/-.001" thickness tolerance
*High carbon, high chromium steel
*For applications that demand the highest wear resistance 401 is standard tolerance
*Ground straight and parallel
Shipping Info:
*Actual Weight - 4.7800