Holemaking Tools For Sale - Boring, Drilling, Reaming | Exact Tooling - (25001 Products)
SCLT050204N-PH IN2005
Item #: IC045140234
Brand: Ingersoll
Model #: 5140234
| Product Specifications | |
|---|---|
| Inscribed Circle Diameter (IC) | 0.197″ |
| Application | | Drill Mill | Drilling | |
| Corner Radius (RE) | 0.016″ |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Non Ferrous Metals | Hi Temp Alloys | |
| Shape | Radius |
| Measurement Type | Inch |
| Coating | TiAlN |
| Body Material | Steel |
| Grade | IN2005 |
$ 16.98
2″ Diameter × 3/8″ Width, Carbon Steel, 0.014″ Crimped Bristle, Wheel Brush
Item #: MJ74C214C
Brand: Brush Research
Model #: C214C
| Product Specifications | |
|---|---|
| Diameter | 2″ |
| Bristle Type | Crimped |
| Width | 3/8″ |
| Trim Length | 0.562″ |
| Abrasive Material | Carbon Steel |
| Maximum RPM | 20,000 |
| Arbor Hole | 1/2″ |
| Thickness | 3/8″ |
| Bristle Diameter | 0.014″ |
| Standard Pack | 6 |
$ 10.34
2.25 mm Dia. × 2.5 mm Shank Dia. × 35 mm OAL × 14 mm Flute Length, 120 Degrees, 2 Flute, HSS-E, Micro Drill
Item #: FB505100225R
Brand: GMauvias
Model #: 5100225R
| Product Specifications | |
|---|---|
| Tool Diameter | 2.25 mm |
| Connection Diameter Machine Side (DCONMS) | 2.5 mm |
| Cutting Edge Material | HSS-E |
| Flute Length | 14 mm |
| Flute Count (NOF) | 2 |
| Overall Length (OAL) | 35 mm |
| Angle | 120 Degrees |
| Length Group | 5xD |
$ 9.89
#81 Dia. × 1/8″ Shank × 0.225″ Flute Length × 1-1/2″ OAL, Standard, 118°, Uncoated, 2 Flute, Straight / Cylindrical Solid Carbide Drill
Item #: KY878500683
Brand: KYOCERA SGS Precision Tools
Model #: 07272
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | #81 |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.013″ |
| Flute Type | Spiral |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #81 |
| Point Shape | 4 Facet |
| Length Group | Standard |
| Measurement Type | Wire Gauge |
| Coating | Uncoated |
| Series/List # | 105 |
| Applicable Material | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | Other Non-Metallic Materials |
| Length Chip Flute (LCF) | 0.225″ |
| Application | Micro Drilling |
| Overall Length (OAL) | 1-1/2″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 118 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Cylindrical |
$ 9.82
Brand: Bosch / Part #: EL-50650-6
Item #: 97487615
Brand: Bosch
Model #: EL-50650-6
Product Specifications
Accessory Type
Charging Cable
$ 430.45
3/16″ Cutting Dia. 3/16″Shank Dia, 1 Flute, 60 Degrees, Carbide Countersink Series/List #5752
Item #: MT6050628
Brand: Morse Cutting Tools
Model #: 50628
| Product Specifications | |
|---|---|
| Tool Type | Countersink |
| Point Angle (SIG) | 60 Degrees |
| Cutting Diameter (DC) | 3/16″ |
| Coating | Bright |
| Overall Length (OAL) | 2″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Series/List # | 5752 |
| Flute Count (NOF) | 1 |
$ 25.60
1/4″ × 70 mm OAL 90 Degree HSS Co8 Spotting Drills NC Spotting Drills Uncoated
Item #: YG180161L
Brand: YG-1 Cutting Tools
Model #: 0161L
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 1/4″ |
| Cutting Edge Material | HSS Co8 |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 1/4″ |
| Applicable Material | Steel |
| Decimal Equivalent | 0.25″ |
| Flute Length | 17 mm |
| Angle | 90 Degrees |
| Size | 1/4″ |
| Flute Count (NOF) | 2 |
| Measurement Type | Fractional |
| Overall Length (OAL) | 70 mm |
| Cutting Direction (HAND) | Right Hand |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Tool Type | NC Spotting Drill |
| Coating | Uncoated |
| Series/List # | D2N90 |
$ 7.80
1/4″ Dia. × 3/8″ LOC × 3/8″ Shank Size × 4″ OAL, 4 Flute, Carbide, Uncoated, Ballnose Endmill
Item #: GE90776316
Brand: Harvey Tool
Model #: 776316
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Usable Length (LU) | 1-1/2″ |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Corner Radius (RE) | 0.125″ |
| Depth of Cut Maximum (APMX) | 3/8″ |
| Body Half Taper Angle (BHTA) | 2 Degrees |
| Overall Length (OAL) | 4″ |
| Length Group | 1.5D |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | Uncoated |
| Decimal Equivalent | 0.25″ |
| Flute Count (NOF) | 4 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 30 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
$ 105.74
3mm XPM High Performance VP-GDR Jobber Drill-V
Item #: TP338593030
Brand: OSG USA, Inc.
Model #: 8593030
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 3 mm |
| Flute Length | 33 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 3 mm |
| Connection Diameter Machine Side (DCONMS) | 3 mm |
| Measurement Type | Metric |
| Shape | Jobber Drill |
| Cutting Edge Material | XPM |
| Tool Type | Drill |
| Coating | V |
| Series/List # | 2000 |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Cutting Depth | 33 mm |
| Overall Length (OAL) | 65 mm |
$ 25.96
Brand: Guhring / Part #: 9065160051600
Item #: 98619448
Brand: Guhring
Model #: 9065160051600
Product Specifications
Drill Bit Size (Inch)
13/64
Overall Length (mm)
180.0000
Flute Length (mm)
140.00
Tool Material
Solid Carbide
Coating/Finish
Uncoated
Drill Point Angle
135
Shank Type
Cylindrical
Coolant Through
Yes
Flute Type
Spiral
Series
6516
Point Type
RT100 T
Cutting Direction
Right Hand
Tool Application
Deep Hole Drilling
Spiral Type
Regular Spiral
Drill Bit Diameter Tolerance
H7
Number Of Flutes
2
Primary Workpiece Material
Aluminum
Drill Bit Size (Decimal Inch)
0.2031
Shank Diameter (mm)
6.0000
Shank Length (mm)
36.000
Flute By Diameter Ratio
20xD
Maximum Drilling Depth (mm)
134.00
$ 438.50
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-1.1021M
Item #: 98471519
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-1.1021M
Product Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.000015/-0.000015
Blank Number Wire Size
#4
Inner Diameter (Decimal Inch)
1.1021
Calibrated
No
Traceability Certification Included
No
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
$ 578.01
3/8″ 6 Flute 90 Degree Carbide Countersink - Series 606
Item #: DD9074258
Brand: KYOCERA SGS Precision Tools
Model #: 74258
| Product Specifications | |
|---|---|
| Tool Type | Countersink |
| Point Angle (SIG) | 90 Degrees |
| Cutting Diameter (DC) | 3/8″ |
| Coating | Uncoated |
| Overall Length (OAL) | 2-13/16″ |
| Cutting Edge Material | Carbide |
| Shank Length (LS) | 1-3/4″ |
| Length Chip Flute (LCF) | 3/8″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Flute Type | Straight |
| Flute Count (NOF) | 6 |
| Series/List # | 606 |
$ 82.78
75497 ALTIMA #V STUB DRL
Item #: AX3975497
Brand: M A Ford
Model #: 20637700A
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | V |
| Point Angle (SIG) | 118 Degrees |
| Decimal Equivalent | 0.377″ |
| Measurement Type | Letter |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | V |
| Usable Length (LU) | 1-1/4″ |
| Coating | Altima |
| Overall Length (OAL) | 2-1/2″ |
| Connection Diameter Machine Side (DCONMS) | 0.377″ |
| Flute Count (NOF) | 2 |
| Coolant Supply Property (CSP) | External |
$ 92.45
1/2″ Cutting Dia. × 1/2″ Shank Size × 3/4″ LOC × 4″ OAL, 3 Flute, Carbide, TiB2, Square End Mill
Item #: GE90930932C8
Brand: Harvey Tool
Model #: 930932-C8
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Neck Diameter (DN) | 0.49″ |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Length Group | 5D |
| Overall Length (OAL) | 4″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | TiB2 |
| Decimal Equivalent | 0.5″ |
| Flute Count (NOF) | 3 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 42 Degrees |
| Shank Size (SS) | 1/2″ |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Square |
| Single / Double End | Single End |
| Usable Length (LU) | 2-1/2″ |
$ 102.99
41/64 RHS / RHC HSS-CO 8% (M42) 135 Degree Split Point Q-Cobalt Wide Land Parabolic Drill - Straw / Gold Oxide
Item #: CD70C14237
Brand: Cleveland
Model #: C14237
| Product Specifications | |
|---|---|
| Measurement Type | Inch |
| Flute Type | Spiral |
| Drill Bit Size / Cutting Diameter (DC) | 41/64″ |
| Helix Angle | CW |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 41/64″ |
| Flute Count (NOF) | 2 |
| Decimal Equivalent | 0.6406″ |
| Overall Length (OAL) | 4-1/2″ |
| Angle | 135 Degrees |
| Shank Type | Straight |
| Shape | Screw Machine |
| Point Shape | Split |
| Coating | Straw |
| Tool Type | Drill |
| Cutting Edge Material | HSSCo |
| Connection Diameter Machine Side (DCONMS) | 41/64″ |
| Flute Length | 2-7/8″ |
| Series/List # | 2175 |
$ 116.50
9.6 mm Dia. × 10 mm Shank × 49 mm Usable Length × 103 mm OAL, 5xD, 140 Degree, AlTiN, 2 Flute, Coolant Through, HP Patriot Solid Carbide Drill
Item #: AV41928000422
Brand: Keo
Model #: 928-000-422
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 9.6 mm |
| Functional Length (LF) | 61 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 9.6 mm |
| Measurement Type | Metric |
| Length Group | 5xD |
| Usable Length (LU) | 49 mm |
| Coating | TiAlN |
| Overall Length (OAL) | 103 mm |
| Connection Diameter Machine Side (DCONMS) | 10 mm |
| Flute Count (NOF) | 2 |
| Coolant Supply Property (CSP) | Coolant Thru |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 140 Degrees |
$ 204.99
#8 RHS / RHC HSS 135 Degree Split Point Heavy Duty Jobber Drill - TiCN
Item #: CH1043678
Brand: Chicago-Latrobe
Model #: 43678
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | #8 |
| Point Shape | Split |
| Decimal Equivalent | 0.199″ |
| Shank Type | Straight |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #8 |
| Connection Diameter Machine Side (DCONMS) | 0.199″ |
| Measurement Type | Wire Gage |
| Shape | Jobber Drill |
| Angle | 135 Degrees |
| Tool Type | Drill |
| Cutting Edge Material | HSS |
| Tool Radius | 135 Degrees |
| Flute Type | Spiral |
| Series/List # | 150ASP-TC |
| Coating | TiCN |
| Flute Count (NOF) | 2 |
| Flute Length | 2-7/16″ |
| Overall Length (OAL) | 3-5/8″ |
| Helix Angle | CW |
$ 11.90
21/64 RHS / RHC HSS 118 Degree Radial Point CLE-MAX Jobber Drill - Steam Oxide
Item #: CD71C71021
Brand: Cleveland
Model #: C71021
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 21/64″ |
| Point Shape | Radial |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 21/64″ |
| Shank Type | Straight |
| Decimal Equivalent | 0.3281″ |
| Standard | ASME B94.11M |
| Measurement Type | Inch |
| Connection Diameter Machine Side (DCONMS) | 21/64″ |
| Angle | 118 Degrees |
| Shape | Jobber Drill |
| Cutting Edge Material | HSS-E |
| Tool Type | Drill |
| Flute Type | Spiral |
| Tool Radius | 118 Degrees |
| Coating | Steam Oxide |
| Series/List # | 2001G |
| Flute Length | 3-5/16″ |
| Flute Count (NOF) | 2 |
| Helix Angle | 32 Degrees |
| Overall Length (OAL) | 4-5/8″ |
$ 12.01
29/64 MARXMAN MECHANIC LENGTH DRILL
Item #: MX1082140
Brand: Morse Cutting Tools
Model #: 82140
| Product Specifications | |
|---|---|
| Tool Diameter | 29/64″ |
| Length Group | Regular |
| Angle | 135 Degrees |
| Measurement Type | Fractional |
| Coating | Black|Gold |
| Overall Length (OAL) | 4-5/8″ |
| Coolant Supply Property (CSP) | No |
| Point Shape | Split |
| Cutting Depth | 3″ |
| Shank Standard | 3/8″ |
| Cutting Edge Material | HSS |
| Shank Type | 3-Flats Straight |
| Decimal Equivalent | 0.4531″ |
| Series/List # | 383 |
| Flute Length | 3″ |
$ 12.61
8.40mm RHS / RHC HSS 118 Degree Radial Point CLE-MAX Jobber Drill - Steam Oxide
Item #: CD71C71289
Brand: Cleveland
Model #: C71289
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 8.4 mm |
| Shank Type | Straight |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 8.4 mm |
| Standard | DIN 338 |
| Measurement Type | Metric |
| Connection Diameter Machine Side (DCONMS) | 8.4 mm |
| Angle | 118 Degrees |
| Shape | Jobber Drill |
| Cutting Edge Material | HSS-E |
| Tool Type | Drill |
| Flute Type | Spiral |
| Tool Radius | 118 Degrees |
| Coating | Steam Oxide |
| Series/List # | 2001G |
| Flute Length | 75 mm |
| Flute Count (NOF) | 2 |
| Helix Angle | 32 Degrees |
| Overall Length (OAL) | 117 mm |
| Point Shape | Radial |
$ 13.18