Holemaking Tools For Sale - Boring, Drilling, Reaming | Exact Tooling - (25001 Products)
Square End Mill; 12 mm Dia. × 16 mm LOC × 12 mm Shank Dia. × 73 mm OAL ; 4 FL ; Carbide ; AlTiN ; Series Multi-Cut
Item #: ER4521189
Brand: EMUGE-FRANKEN
Model #: 2897A.012
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 12 mm |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 12 mm |
| Shank Type | Weldon |
| Depth of Cut Maximum (APMX) | 16 mm |
| End Shape | Square |
| Overall Length (OAL) | 73 mm |
| Applicable Material | | Steel | Cast Iron | Hard Materials | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Carbide |
| Series/List # | Multi-Cut |
| Coating | AlTiN |
82433 3 FL 3/8 EM Uncoat
Item #: HS1082433
Brand: Helical Solutions
Model #: 82433
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Flute Count (NOF) | 3 |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Shank Type | N |
| Depth of Cut Maximum (APMX) | 2″ |
| End Shape | Corner Radius |
| Overall Length (OAL) | 4″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) | 0.01″ |
| Coating | Uncoated |
| Decimal Equivalent | 0.375″ |
1/32″ Dia. × 1/8″ LOC × 1/8″ Shank Size × 2-1/2″ OAL, 4 Flute, Carbide, Uncoated, Ballnose Endmill
Item #: GE90801531
Brand: Harvey Tool
Model #: 801531
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/32″ |
| Usable Length (LU) | 1/8″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.0155″ |
| Depth of Cut Maximum (APMX) | 1/8″ |
| Length Group | 4D |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball Nose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.0313″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| Shank Type | Round |
Keyseat Cutter, 3/16″ Dia. × 3/16″ Shank Dia. × 0.285″ CW × 2-1/2″ OAL, 4 Teeth, 4 Degrees, Carbide, Round Shank, Uncoated, Specialty Profiles
Item #: GE90780012
Brand: Harvey Tool
Model #: 780012
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/16″ |
| Protruding Length (LPR) | 1″ |
| Connection Diameter Machine Side (DCONMS) | 3/16″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 2-1/2″ |
| Coating | Uncoated |
| Corner Radius (RE) | 0.01″ |
| Shank Type | Round |
| Number of Teeth | 4 |
| Flute Type | Helical |
| Cutting Width (CW) | 0.285″ |
| Series/List # | Specialty Profiles |
| Angle | 4 Degrees |
| Cutting Length | 0.285″ |
| Cutting Direction (HAND) | Right Hand |
| Measurement Type | Inch |
| Neck Diameter (DN) | 0.16″ |
4-1/4″ × 1-1/8″ × 1-1/4″ - HSS- Convex Milling Cutter - 10T - R - Uncoated
Item #: KE11921000045
Brand: Keo
Model #: 921-000-045
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 4-1/4″ |
| Cutting Direction (HAND) | Neutral |
| Cutting Width (CW) | 1-1/8″ |
| Cutting Edge Material | HSS |
| Connection Diameter Machine Side (DCONMS) | 1-1/4″ |
| Flute Type | Straight |
| Number of Teeth | 10 |
| Measurement Type | Inch |
| Coating | Uncoated |
0.075″ Dia. × 0.225″ LOC × 1/8″ Shank Size × 1-1/2″ OAL, 2 Flute, Carbide, Amorphous Diamond, Ballnose Endmill
Item #: GE9074075C4
Brand: Harvey Tool
Model #: 74075-C4
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.075″ |
| Usable Length (LU) | 0.225″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Corner Radius (RE) | 0.0375″ |
| Depth of Cut Maximum (APMX) | 0.225″ |
| Length Group | 3D |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ball Nose |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Amorphous Diamond |
| Cutting Direction (HAND) | Right Hand |
| Flute Count (NOF) | 2 |
| Center Cutting | No |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| Shank Type | Round |
1/2X2X4 3FL 0.090CR
Item #: HS1048475
Brand: Helical Solutions
Model #: 48475
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Corner Radius (RE) | 0.09″ |
| Depth of Cut Maximum (APMX) | 2″ |
| Length Group | 4D |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.5″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 2″ |
6M HM 3D BALL XL 2FL TIALN
Item #: ER451960A006
Brand: EMUGE-FRANKEN
Model #: 1960A.006
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Application | | Finishing | |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Tool Type | Ball Nose / Tapered |
| Overall Length (OAL) | 80 mm |
| End Shape | Ball Nose |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | TiAlN |
| Decimal Equivalent | 0.2362″ |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Shank Type | HA |
| Series/List # | 1960A |
| Usable Length (LU) | 6 mm |
82564 5 FL 3/4 EM APLUS
Item #: HS1082564
Brand: Helical Solutions
Model #: 82564
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Flute Count (NOF) | 5 |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Shank Type | N |
| Depth of Cut Maximum (APMX) | 4″ |
| End Shape | Corner Radius |
| Overall Length (OAL) | 6-1/2″ |
| Applicable Material | | Steel | |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) | 0.01″ |
| Coating | APLUS |
| Decimal Equivalent | 0.75″ |
6M HM 3D BALL XL SHK8 2FL TIAL
Item #: ER4519082
Brand: EMUGE-FRANKEN
Model #: 1960A.10608
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Application | | Finishing | |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Tool Type | Ball Nose / Tapered |
| Overall Length (OAL) | 100 mm |
| End Shape | Ball Nose |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | TiAlN |
| Decimal Equivalent | 0.2362″ |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Shank Type | HA |
| Series/List # | 1960A |
| Usable Length (LU) | 6 mm |
1/4X3/8X4 3FL SQ EM
Item #: HS1081569
Brand: Helical Solutions
Model #: 81569
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Neck Diameter (DN) | 0.237″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Neck Length (LN) | 1.25″ |
| Depth of Cut Maximum (APMX) | 3/8″ |
| Length Group | 1.5D |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.25″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 2.375″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
Ballnose End Mill; 21/64″ Dia. × 1″ LOC × 3/8″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, Uncoated
Item #: TA15TC12921
Brand: Titan USA
Model #: TC12921
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 21/64″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Usable Length (LU) | 1″ |
| Depth of Cut Maximum (APMX) | 1″ |
| Corner Radius (RE) | 0.1641″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.3281″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Center Cutting | Yes |
1/4X3/8X4 3FL SQ_EM
Item #: HS1081383
Brand: Helical Solutions
Model #: 81383
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Neck Diameter (DN) | 0.237″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Neck Length (LN) | 1.25″ |
| Depth of Cut Maximum (APMX) | 3/8″ |
| Length Group | 1.5D |
| Overall Length (OAL) | 4″ |
| Decimal Equivalent | 0.25″ |
| Coating | Uncoated |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Shank Length (LS) | 2.375″ |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
1 mm Cutting Dia. × 4 mm Shank Size × 1.5 mm LOC × 50 mm OAL, 3 Flute, Carbide, Uncoated, Square End Mill
Item #: GE90858422
Brand: Harvey Tool
Model #: 858422
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1 mm |
| Usable Length (LU) | 1.5 mm |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| Applicable Material | | Aluminum / Non-Ferrous Materials | |
| Depth of Cut Maximum (APMX) | 1.5 mm |
| Length Group | 1.5D |
| Overall Length (OAL) | 50 mm |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | Uncoated |
| Measurement Type | Metric |
| Flute Count (NOF) | 3 |
| Shank Size (SS) | 4 mm |
| Flute Helix Angle (FHA) | 42 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
| End Shape | Square |
Brand: Ingersoll Cutting Tools / Part #: 3204531
Item #: 98787914
Brand: Ingersoll Cutting Tools
Model #: 3204531Product Specifications
Minimum Drill Diameter (mm)
9.50
Maximum Drill Diameter (mm)
9.90
Drill Depth by Diameter Ratio
8xD
Maximum Drill Depth (mm)
76.00
Shank Type
Cylindrical
Insert Style
TPA; TNA; TPC; TMA; TKA; TPF
Insert Seat Size
9.5
Shank Diameter (mm)
12.0000
Tool Material
Steel
Compatible Insert Style
TPA; TNA; TPC; TMA; TKA; TPF
Compatible Insert Size Code
09..
Overall Length (mm)
131.9000
Series
TD
Toolholder Style
TD
Flute Length (mm)
131.90
Body Length
131.900
Shank Length (mm)
45.000
Tool Application
Drilling
Tool Performance
General Purpose
Primary Workpiece Material
Universal
Cutting Direction
Right Hand
Coolant Through
Yes
Coating Classification
PVD
6M HM 3D BALL XL SHK8 2FL TIAL
Item #: ER4519065
Brand: EMUGE-FRANKEN
Model #: 1960A.00608
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Application | | Finishing | |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Tool Type | Ball Nose / Tapered |
| Overall Length (OAL) | 100 mm |
| End Shape | Ball Nose |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | TiAlN |
| Decimal Equivalent | 0.2362″ |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Shank Type | HA |
| Series/List # | 1960A |
| Usable Length (LU) | 6 mm |
Brand: Ingersoll Cutting Tools / Part #: 3221124
Item #: 98788821
Brand: Ingersoll Cutting Tools
Model #: 3221124Product Specifications
Minimum Drill Diameter (mm)
18.00
Maximum Drill Diameter (mm)
18.90
Drill Depth by Diameter Ratio
3.5xD
Maximum Drill Depth (mm)
78.23
Shank Type
Weldon Flat
Insert Style
YBB; YAB
Insert Seat Size
18
Shank Diameter (mm)
18.0000
Tool Material
Steel
Compatible Insert Style
YBB; YAB
Compatible Insert Size Code
18..
Overall Length (mm)
126.2400
Series
YD
Toolholder Style
YD
Flute Length (mm)
78.23
Body Length
78.230
Shank Length (mm)
48.010
Tool Application
Drilling
Tool Performance
General Purpose
Primary Workpiece Material
Universal
Cutting Direction
Right Hand
Coolant Through
Yes
6M HM AL BALL SH 2FL
Item #: ER4518472
Brand: EMUGE-FRANKEN
Model #: 1921.006
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 6 mm |
| Usable Length (LU) | 6 mm |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Application | | Finishing | |
| Overall Length (OAL) | 57 mm |
| Tool Type | Ball Nose |
| Cutting Edge Material | Carbide |
| Coolant Supply Property (CSP) | External |
| Coating | Bright |
| Decimal Equivalent | 0.2362″ |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Shank Type | HA |
| Series/List # | 1921 |
Ballnose End Mill; 1/2″ Dia. × 5/8″ LOC × 1/2″ Shank Dia. × 3″ OAL, 4 FL, Carbide, AlTiN
Item #: TA15TC14732
Brand: Titan USA
Model #: TC14732
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Usable Length (LU) | 5/8″ |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Corner Radius (RE) | 1/4″ |
| Overall Length (OAL) | 3″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.5″ |
| Coating | TiAlN |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Center Cutting | Yes |
1/8″ × 0.058″ × 0.031R 4-Flute Carbide Corner Rounding Endmill, AlTiN
Item #: KE11932000831
Brand: Keo
Model #: 932-000-831
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.058″ |
| Coating | AlTiN |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Flute Count (NOF) | 4 |
| Overall Length (OAL) | 1-1/2″ |
| Shank Type | Round |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) | 0.031″ |