Email: sales@exacttooling.com
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

Motion Control & Fluid Power > Bearings (ET04) - (9865 Products)

Motion Control & Fluid Power > Bearings (ET04)
SKF - 20mm Bore Diam, 42mm OD, Open Deep Groove Radial Ball Bearing - 8mm Wide, 1 Row, Round Bore, 910 Lb Static Capacity, 1,550 Lb Dynamic Capacity - Exact Tooling

SKF - 20mm Bore Diam, 42mm OD, Open Deep Groove Radial Ball Bearing - 8mm Wide, 1 Row, Round Bore, 910 Lb Static Capacity, 1,550 Lb Dynamic Capacity


Item #: 88006952
Brand: SKF
Model #: 16004
Exact Tooling IR#: 04

Features and Benefits

Deep groove ball bearings are used for high and very high speeds in operations, requiring little maintenance. They are designed with balls rolling between an inner and outer raceway. They are commonly used in pumps, gear motors and electric motors.
Open Bearing design without seals or shields and are intended to be lubricated in place and periodically maintained
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Deep Groove
Style Open
Bore Diameter (mm) 20.00
Outside Diameter (mm) 42.00
Width (mm) 8.00
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 910
Dynamic Load Capacity (Lb.) 1550

$ 36.92
Tritan - 2-1/2" ID, 7.36" OAL x 2.74" OAH 4-Bolt Flange - 8,992 Lb Static Cap, 12,927 Lb Dyn Cap, 5.87" Btw Mnt Hole Ctrs, 1.18" Base-to-Ctr Ht, Cast Iron/Steel - Exact Tooling

Tritan - 2-1/2" ID, 7.36" OAL x 2.74" OAH 4-Bolt Flange - 8,992 Lb Static Cap, 12,927 Lb Dyn Cap, 5.87" Btw Mnt Hole Ctrs, 1.18" Base-to-Ctr Ht, Cast Iron/Steel


Item #: 66500430
Brand: Tritan
Model #: UCF213-40
Exact Tooling IR#: 04

Product Specifications
Type 4-Bolt Flange
Inside Diameter (Decimal Inch) 2.5000
Inside Diameter (Inch) 2-1/2
Width (Decimal Inch) 7.3600
Overall Length (Decimal Inch) 7.3600
Overall Height (Decimal Inch) 2.7400
Static Load Capacity (Pounds) 8992.00
Dynamic Load Capacity (Pounds) 12927
Distance Between Mounting Hole Centers (Decimal Inch) 5.8700
Material Cast Iron/Steel
Distance Between Base And Center (Decimal Inch) 1.1800
Insert Material 52100 Steel
Lock Type Set Screw
Bolt Size (Inch) 5/8
Metric Bolt Size 16.0000

$ 173.41
SKF - 35mm Bore Diam, 80mm OD, Double Shield Deep Groove Radial Ball Bearing - 21mm Wide, 1 Row, Round Bore, 19,000 Nm Static Capacity, 35,100 Nm Dynamic Capacity - Exact Tooling

SKF - 35mm Bore Diam, 80mm OD, Double Shield Deep Groove Radial Ball Bearing - 21mm Wide, 1 Row, Round Bore, 19,000 Nm Static Capacity, 35,100 Nm Dynamic Capacity


Item #: 45668241
Brand: SKF
Model #: 6307 2ZJEM
Exact Tooling IR#: 04

Features and Benefits

Deep groove ball bearings are used for high and very high speeds in operations, requiring little maintenance. They are designed with balls rolling between an inner and outer raceway. They are commonly used in pumps, gear motors and electric motors.
Double shield refers to two shields, one on each side of the bearing. The shield is located on the outer race does not make contact with the inner race. Ideal for very high speeds, but does not prevent smaller contaminants from entering the bearing. They are more economical than seals.
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Deep Groove
Style Double Shield
Bore Diameter (mm) 35.00
Outside Diameter (mm) 80.00
Outside Diameter (Decimal Inch) 3.1500
Width (Decimal Inch) 0.8300
Width (mm) 21.00
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Housing Material Steel
Snap Ring Included Without Snap Ring
Static Load Capacity (Nm) 19000
Dynamic Load Capacity (Nm) 35100
ABEC Scale ABEC-3
Maximum RPM 9500

$ 97.11
IKO - 1.772" Bore Diam, Needle Roller Bearing Inner Ring - Precision Needle, 1.969" Outside Diam, 0.984" Wide - Exact Tooling

IKO - 1.772" Bore Diam, Needle Roller Bearing Inner Ring - Precision Needle, 1.969" Outside Diam, 0.984" Wide


Item #: 09019936
Brand: IKO
Model #: LRT455025
Exact Tooling IR#: 04

Product Specifications
Type Needle Roller Bearing - Inner Ring
Bore Diameter (Decimal Inch) 1.7720
Bore Diameter (mm) 45.000
Outside Diameter (Decimal Inch) 1.9690
Outside Diameter (mm) 50.0000
Width (Decimal Inch) 0.9840
Width (mm) 25.00
Dynamic Load Capacity (Pounds) 0
Style. Precision Needle

$ 25.41
Encapsulated Suits: Large, Green, Multi-Layer Non-Woven Barrier Laminate Fabric, N/AClosure, Taped & Welt, Yes

Encapsulated Suits: Large, Green, Multi-Layer Non-Woven Barrier Laminate Fabric, N/AClosure, Taped & Welt, Yes


Item #: 86714276
Brand: Ansell
Model #: GR40-T-92-755-04

Product Specifications

Size Large
Color Green
Material Multi-Layer Non-Woven Barrier Laminate Fabric
Garment Type Chemical-Resistant
High Visibility No
Hood Type Attached Hood
Ankle Style Attached Socks; Elastic with Socks; Boot Overflap
Seam Style Taped; Welt
Features HEPA filter provides secondary protection from airline contamination and a SMC silencer ensures the noise inside the suit is always below 70 dB (even at maximum airflow); Emergency rip cord permits rapid doffing of the suit in cases of emergency or undue distress to the wearer; Exceptional protection, over 200 chemicals permeation tested, including chemical warfare agents; Suit/Belt mounted regulator complete with a low flow warning whistle the AVANT STS regulator can be mounted on the suit and removed for reuse providing cleaning and decontamination is permissible; Welded and taped seams, our highest barrier to liquids and particulates; A range of sleeve options available, including double cuffs and permanently attached chemical protective gloves; Attached socks with elasticated boot overflap - Socks are designed to be worn inside chemical protective boots with the leg overflap worn outside to reduce the potential for chemical ingress; Panoramic visor design ensures a good field of vision for the wearer
Wrist Style Elastic
Series Alphatec 4000 AVANT AIRLINE Model 755
Entry Back Side
Material Weight (oz.) 3.6300
Material Thickness (mm) 0.34
Hazardous Protection Yes
Pant Type Waist Length Pant
Closure Type Double Zipper
UNSPSC Code 46181500
Number Of Pockets 0.000
Series Alphatec 4000 AVANT AIRLINE Model 755
Country of Origin China

$ 286.35
SKF - 30mm Bore Diam, 72mm OD, Open Angular Contact Radial Ball Bearing - 19mm Wide, 1 Row, Round Bore, 19,300 Lb Static Capacity, 34,500 Lb Dynamic Capacity - Exact Tooling

SKF - 30mm Bore Diam, 72mm OD, Open Angular Contact Radial Ball Bearing - 19mm Wide, 1 Row, Round Bore, 19,300 Lb Static Capacity, 34,500 Lb Dynamic Capacity


Item #: 45670346
Brand: SKF
Model #: 7306 BEGBY
Exact Tooling IR#: 04

Features and Benefits

Open Bearing design without seals or shields and are intended to be lubricated in place and periodically maintained
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Angular Contact
Style Open
Bore Diameter (mm) 30.00
Outside Diameter (mm) 72.00
Outside Diameter (Decimal Inch) 2.8300
Width (Decimal Inch) 0.7500
Width (mm) 19.00
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Contact Angle 40
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 19300
Dynamic Load Capacity (Lb.) 34500
Cage Material Pressed brass
Maximum RPM 10000

$ 158.75
Fiber Disc: 4-1/2" Disc Dia, Arbor Hole, 60 Grit, Ceramic Alumina

Fiber Disc: 4-1/2" Disc Dia, Arbor Hole, 60 Grit, Ceramic Alumina


Item #: 94861101
Brand: ARC Abrasives
Model #: 71-047805

Product Specifications

Disc Diameter (Inch) 4-1/2
Abrasive Material Ceramic Alumina
Grit 60
Attachment Type Arbor Hole
Disc Color Gray
Series PREDATOR
Disc Type Type 27
Backing Material Fiber
Grade Coarse
Abrasive Type Coated
Maximum Rpm 13500.000
UNSPSC Code 31191506
Country of Origin South Korea

$ 3.41
USDI - 1 Row, 1" OD, 1-1/4" Bore Diam, Round Open Conveyor Roller Bearing - 440 Lb Capacity, 550 Max RPM, with Flange, Steel with Steel Housing - Exact Tooling

USDI - 1 Row, 1" OD, 1-1/4" Bore Diam, Round Open Conveyor Roller Bearing - 440 Lb Capacity, 550 Max RPM, with Flange, Steel with Steel Housing


Item #: 36559169
Brand: USDI
Model #: HB106FF
Exact Tooling IR#: 04

Features and Benefits

Conveyor roller bearings are designed to accommodate loads where high levels of exposure to contamination are present. They are economical and are used in conveyor systems.
Open bearings are designed with an extended inner ring or flange that can improve shaft support and eliminate the need for location spacers
Radial ball bearings with a flange axially locates the bearing in the housing and eliminates the need for housing shoulders or snap ring.
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Conveyor Roller Bearing
Style Open
Bore Diameter (Inch) 1-1/4
Outside Diameter (Decimal Inch) 1.0000
Flange Type With Flange
Number of Rows 1
Bore Type Round
Housing Material Steel
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 440
Dynamic Load Capacity (Lb.) 440
Ball Material Steel
Maximum RPM 550

$ 111.09
SKF - 40mm Bore Diam, 80mm OD, Open Angular Contact Radial Ball Bearing - 18mm Wide, 1 Row, Round Bore, 24,000 Lb Static Capacity, 36,500 Lb Dynamic Capacity - Exact Tooling

SKF - 40mm Bore Diam, 80mm OD, Open Angular Contact Radial Ball Bearing - 18mm Wide, 1 Row, Round Bore, 24,000 Lb Static Capacity, 36,500 Lb Dynamic Capacity


Item #: 45669132
Brand: SKF
Model #: 7208 BECBP
Exact Tooling IR#: 04

Features and Benefits

Open Bearing design without seals or shields and are intended to be lubricated in place and periodically maintained
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Angular Contact
Style Open
Bore Diameter (mm) 40.00
Outside Diameter (mm) 80.00
Outside Diameter (Decimal Inch) 3.1500
Width (Decimal Inch) 0.7100
Width (mm) 18.00
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Contact Angle 40
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 24000
Dynamic Load Capacity (Lb.) 36500
Cage Material Plastic
Maximum RPM 9000

$ 168.89
SKF - 12mm Bore Diam, 24mm OD, Double Seal Thin Section Radial Ball Bearing - 6mm Wide, 1 Row, Round Bore, 220 Lb Static Capacity, 506 Lb Dynamic Capacity - Exact Tooling

SKF - 12mm Bore Diam, 24mm OD, Double Seal Thin Section Radial Ball Bearing - 6mm Wide, 1 Row, Round Bore, 220 Lb Static Capacity, 506 Lb Dynamic Capacity


Item #: 78054376
Brand: SKF
Model #: 61901-2RS1
Exact Tooling IR#: 04

Features and Benefits

Thin section radial ball bearings are designed thinner than standard ball brearings. They are very light and used at higher speeds.
Double Seal Bearings are factory lubricated with oil or grease and designed to retain lubricants while keeping contaminates out. The seal is on each side of the bearing and is located on the outer race making some contact with the inner race.
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Thin Section
Style Double Seal
Bore Diameter (mm) 12.00
Outside Diameter (mm) 24.00
Width (mm) 6.00
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 220
Dynamic Load Capacity (Lb.) 506

$ 98.43
SKF - 25mm Bore Diam, 42mm OD, Open Thin Section Radial Ball Bearing - 9mm Wide, 1 Row, Round Bore, 899 Lb Static Capacity, 1,490 Lb Dynamic Capacity - Exact Tooling

SKF - 25mm Bore Diam, 42mm OD, Open Thin Section Radial Ball Bearing - 9mm Wide, 1 Row, Round Bore, 899 Lb Static Capacity, 1,490 Lb Dynamic Capacity


Item #: 78057106
Brand: SKF
Model #: 61905
Exact Tooling IR#: 04

Features and Benefits

Thin section radial ball bearings are designed thinner than standard ball brearings. They are very light and used at higher speeds.
Open Bearing design without seals or shields and are intended to be lubricated in place and periodically maintained
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Thin Section
Style Open
Bore Diameter (mm) 25.00
Outside Diameter (mm) 42.00
Width (mm) 9.00
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 899
Dynamic Load Capacity (Lb.) 1490

$ 84.40
Value Collection - 1" ID, 5-5/32" OAL x 1-13/32" OAH 2-Bolt Flange Mounted Bearing - 1,764 Lb Static Cap, 3,147 Lb Dyn Cap, 3-57/64" Btw Mnt Hole Ctrs, 5/8" Base-to-Ctr Ht, Thermoplastic - Exact Tooling

Value Collection - 1" ID, 5-5/32" OAL x 1-13/32" OAH 2-Bolt Flange Mounted Bearing - 1,764 Lb Static Cap, 3,147 Lb Dyn Cap, 3-57/64" Btw Mnt Hole Ctrs, 5/8" Base-to-Ctr Ht, Thermoplastic


Item #: 69973485
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications
Type 2 Bolt Flange Mounted Bearing
Inside Diameter (Decimal Inch) 1.0000
Inside Diameter (Inch) 1
Width (Inch) 2-3/4
Width (Decimal Inch) 2.7500
Overall Length (Inch) 5-5/32
Overall Length (Decimal Inch) 5.1563
Overall Height (Inch) 1-13/32
Overall Height (Decimal Inch) 1.4063
Static Load Capacity (Pounds) 1764.00
Dynamic Load Capacity (Pounds) 3147
Distance Between Mounting Hole Centers (Decimal Inch) 3.8906
Distance Between Mounting Hole Centers (Inch) 3-57/64
Material Thermoplastic Housing with Zinc Chromate Plated Bearing Insert
Distance Between Base And Center (Decimal Inch) 0.6250
Distance Between Base And Center (Inch) 5/8
Lock Type Set Screw
Bolt Size (Inch) 7/16
Bolt Size (Decimal Inch) 0.4375

$ 66.72
Tritan - 100mm Bore Diam, 150mm OD, Double Seal Deep Groove Radial Ball Bearing - 24mm Wide, 1 Row, Round Bore, 12,200 Lb Static Capacity, 14,200 Lb Dynamic Capacity - Exact Tooling

Tritan - 100mm Bore Diam, 150mm OD, Double Seal Deep Groove Radial Ball Bearing - 24mm Wide, 1 Row, Round Bore, 12,200 Lb Static Capacity, 14,200 Lb Dynamic Capacity


Item #: 35434133
Brand: Tritan
Model #: 6020 2RSC3 PRX
Exact Tooling IR#: 04

Features and Benefits

Deep groove ball bearings are used for high and very high speeds in operations, requiring little maintenance. They are designed with balls rolling between an inner and outer raceway. They are commonly used in pumps, gear motors and electric motors.
Double Seal Bearings are factory lubricated with oil or grease and designed to retain lubricants while keeping contaminates out. The seal is on each side of the bearing and is located on the outer race making some contact with the inner race.
Round bore bearings are designed for mounting on round shafts.
Product Specifications
Type Deep Groove
Style Double Seal
Bore Diameter (mm) 100.00
Outside Diameter (mm) 150.00
Width (mm) 24.00
Flange Type Without Flange
Number of Rows 1
Bore Type Round
Snap Ring Included Without Snap Ring
Static Load Capacity (Lb.) 12200
Static Load Capacity (Nm) 54268
Dynamic Load Capacity (Lb.) 14200
Dynamic Load Capacity (Nm) 63165
Bearing Number 6018

$ 122.35
Quick-Change Disc: Type S, 2" Dia, 36 Grit, Ceramic Alumina, Coated

Quick-Change Disc: Type S, 2" Dia, 36 Grit, Ceramic Alumina, Coated


Item #: 77406346
Brand: ARC Abrasives
Model #: 71-38202

Product Specifications

Disc Diameter 2
Abrasive Type Coated
Abrasive Material Ceramic Alumina
Grit 36
Grade Extra Coarse
Quick Change Compatibility Type S
Attaching System TS (Type II)
Disc Color Gray
Series PREDATOR
Backing Material Cloth
Maximum Rpm 30000
Trimmable No
Flexibility Flexible
UNSPSC Code 31191506
Country of Origin South Korea

$ 1.68
Square End Mill: 3 Flute, Solid Carbide

Square End Mill: 3 Flute, Solid Carbide


Item #: 75512434
Brand: WNT
Model #: 5361815400

Product Specifications

Mill Diameter (mm) 15.00
Mill Diameter (Decimal Inch) 0.6000
Number Of Flutes 3
End Mill Material Solid Carbide
Length of Cut (mm) 65.00
Shank Diameter (mm) 16.00
Overall Length (mm) 180.00
Single Or Double End Single
Coating/Finish Family DLC
Centercutting No
Cutting Direction Right Hand
Flute Direction Right Hand
Extended Reach No
Coolant Through No
Helix Angle 45
Coating/Finish DLC
Variable Helix No
Variable Index No
Chipbreaker No
Flute Type Spiral
Shank Type Weldon Flat
System Of Measurement Metric
UNSPSC Code 27112803
Country of Origin Germany

$ 267.61
Value Collection - 1-7/16" ID, 4-21/32" OAL x 1-27/32" OAH 4-Bolt Flange Mounted Bearing - 3,462 Lb Static Cap, 5,777 Lb Dyn Cap, 3-5/8" Btw Mnt Hole Ctrs, 27/32" Base-to-Ctr Ht, Thermoplastic - Exact Tooling

Value Collection - 1-7/16" ID, 4-21/32" OAL x 1-27/32" OAH 4-Bolt Flange Mounted Bearing - 3,462 Lb Static Cap, 5,777 Lb Dyn Cap, 3-5/8" Btw Mnt Hole Ctrs, 27/32" Base-to-Ctr Ht, Thermoplastic


Item #: 69972644
Brand: Value Collection
Exact Tooling IR#: 04

Product Specifications
Type 4 Bolt Flange Mounted Bearing
Inside Diameter (Decimal Inch) 1.4375
Inside Diameter (Inch) 1-7/16
Width (Inch) 4.656
Width (Decimal Inch) 4.6563
Overall Length (Inch) 4-21/32
Overall Length (Decimal Inch) 4.6563
Overall Height (Inch) 1-27/32
Overall Height (Decimal Inch) 1.8438
Static Load Capacity (Pounds) 3462.00
Dynamic Load Capacity (Pounds) 5777
Distance Between Mounting Hole Centers (Decimal Inch) 3.6250
Distance Between Mounting Hole Centers (Inch) 3-5/8
Material Thermoplastic Housing with Zinc Chromate Plated Bearing Insert
Distance Between Base And Center (Decimal Inch) 0.8438
Distance Between Base And Center (Inch) 27/32
Lock Type Set Screw
Bolt Size (Inch) 1/2
Bolt Size (Decimal Inch) 0.5000

$ 109.07
Browning - 1-3/4" ID, 5-5/8" OAL x 5-5/8" OAH 4-Bolt Flange - 5,216 Lb Static Cap, 7,889 Lb Dyn Cap, 4-3/8" Btw Mnt Hole Ctrs, Cast Iron - Exact Tooling

Browning - 1-3/4" ID, 5-5/8" OAL x 5-5/8" OAH 4-Bolt Flange - 5,216 Lb Static Cap, 7,889 Lb Dyn Cap, 4-3/8" Btw Mnt Hole Ctrs, Cast Iron


Item #: 04716825
Brand: Browning
Model #: VF4S-328
Exact Tooling IR#: 04

Product Specifications
Type 4-Bolt Flange
Inside Diameter (Inch) 1-3/4
Width (Inch) 2-5/32
Overall Length (Inch) 5-5/8
Overall Height (Inch) 5-5/8
Static Load Capacity (Pounds) 5216.00
Dynamic Load Capacity (Pounds) 7889
Distance Between Mounting Hole Centers (Decimal Inch) 4.3750
Distance Between Mounting Hole Centers (Inch) 4-3/8
Material Cast Iron
Insert Material 52100 Steel
Lock Type Set Screw
Bolt Size (Inch) 9/16

$ 261.32
IKO - 1.024" Bore Diam, 3,450 Lb. Dynamic Capacity, Needle Roller Bearing - High Performance, 1.339" Outside Diam, 0.63" Wide - Exact Tooling

IKO - 1.024" Bore Diam, 3,450 Lb. Dynamic Capacity, Needle Roller Bearing - High Performance, 1.339" Outside Diam, 0.63" Wide


Item #: 09018086
Brand: IKO
Model #: TAF263416
Exact Tooling IR#: 04

Product Specifications
Type Needle Roller Bearing
Bore Diameter (Decimal Inch) 1.0240
Bore Diameter (mm) 26.000
Outside Diameter (Decimal Inch) 1.3390
Outside Diameter (mm) 34.0000
Width (Decimal Inch) 0.6300
Width (mm) 16.00
Dynamic Load Capacity (Pounds) 3450
Style. High Performance

$ 37.91
Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.1573; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1

Class XX Minus Ring Gages; Material: Solid Carbide; Tolerance (Decimal Inch): 0.00000/-0.00003; Blank Number Wire Size: #5; Inner Diameter (Decimal Inch): 1.1573; Calibrated: Yes; Traceability Certification Included: NIST; Go/No Go: Go; Standards: B47.1


Item #: 67891515
Brand: GSG
Model #: GSG-CR-1.1573C

Product Specifications

Material Solid Carbide
Tolerance (Decimal Inch) 0.00000/-0.00003
Blank Number Wire Size #5
Inner Diameter (Decimal Inch) 1.1573
Calibrated Yes
Traceability Certification Included NIST
Go/No Go Go
Standards B47.1 Gage Standards; ASME B89.1.6
UNSPSC Code 41111619
Material Solid Carbide
Tolerance (Decimal Inch) 0.00000/-0.00003
Blank Number Wire Size #5
Inner Diameter (Decimal Inch) 1.1573
Calibrated Yes
Traceability Certification Included NIST
Go/No Go Go
Standards B47.1 Gage Standards; ASME B89.1.6
UNSPSC Code 41111619
MSC Part # 67891515
Mfr Part # GSG-CR-1.1573C
Country of Origin Country of Origin is subject to change UNITED STATES

$ 1,198.77
Extra Length Drill Bit: 0.4882", 140 &deg, Carbide

Extra Length Drill Bit: 0.4882", 140 °, Carbide


Item #: 96793294
Brand: Mitsubishi
Model #: 696829

Product Specifications

Drill Bit Size (mm) 12.40
Overall Length (mm) 130.3000
Tool Material Carbide
Coating/Finish TiAlN
Coolant Through Yes
Flute Type Helical
Shank Type Cylindrical
Drill Point Angle 140
Flute Length (mm) 64.80
Point Type X-Thinning
Series MVS
Cutting Direction Right Hand
Tool Application Drilling; Cross Hole; Stack Drilling
Spiral Type Right Hand
Number Of Flutes 2
Web Thinning X-Thinned
Web Configuration Parallel
Primary Workpiece Material Steel
Primary Workpiece Material Code P
Secondary Workpiece Material Bronze; Aluminum; Brass; Carbon Steel; Iron; Aluminum Alloy; Steel; High Strength Bronze; Tempered Steel; Stainless Steel; Cast Iron; Structural Steel; Superalloys & Titanium; Copper; Hardened Steel
Secondary Workpiece Material Code P; K; M; N
Drill Bit Grade High Precision; High Performance
Drill Bit Size (Decimal Inch) 0.4882
Drill Point Length (mm) 2.30
Drill Point Length (Decimal Inch) 0.0906
Overall Length (Decimal Inch) 5.1299
Shank Diameter (Decimal Inch) 0.5512
Shank Diameter (mm) 14.0000
Shank Length (Decimal Inch) 2.4803
Shank Length (mm) 63.000
Flute Length (Decimal Inch) 2.5512
Flute By Diameter Ratio 3xD
Maximum Drilling Depth (Decimal Inch) 1.5551
Maximum Drilling Depth (mm) 39.50
Specification Designation ISO
UNSPSC Code 23241637
Country of Origin VARIOUS

$ 317.54