BES 2023 $10+ Products - (25001 Products)
0.0620″ (1/16″) Cutter Diameter × 0.0200″ Width × 0.0930″ (3/32″) Neck Length Carbide Square Standard Keyseat Cutter, 4 Flutes, AlTiN Coated
Item #: GE9026420C3
Brand: Harvey Tool
Model #: 26420-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Cutting Width (CW) | 0.02″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 1-1/2″ |
| Coating | AlTiN |
$ 57.72
0.0620″ (1/16″) Cutter Diameter × 0.0250″ Width × 0.0930″ (3/32″) Neck Length Carbide Square Standard Keyseat Cutter, 4 Flutes, AlTiN Coated
Item #: GE9026425C3
Brand: Harvey Tool
Model #: 26425-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Cutting Width (CW) | 0.025″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 1-1/2″ |
| Coating | AlTiN |
$ 57.72
0.0620″ (1/16″) Cutter Diameter × 0.0310″ (1/32″) Width × 0.0930″ (3/32″) Neck Length Carbide Square Standard Keyseat Cutter, 4 Flutes, AlTiN Coated
Item #: GE9026431C3
Brand: Harvey Tool
Model #: 26431-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Cutting Width (CW) | 1/32″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 1-1/2″ |
| Coating | AlTiN |
$ 57.72
0.0620″ (1/16″) Cutter Diameter × 0.0390″ Width × 0.0930″ (3/32″) Neck Length Carbide Square Standard Keyseat Cutter, 4 Flutes, AlTiN Coated
Item #: GE9026439C3
Brand: Harvey Tool
Model #: 26439-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Cutting Width (CW) | 0.039″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 1-1/2″ |
| Coating | AlTiN |
$ 57.72
0.0620″ (1/16″) Cutter Diameter × 0.0470″ (3/64″) Width × 0.0930″ (3/32″) Neck Length Carbide Square Standard Keyseat Cutter, 4 Flutes, AlTiN Coated
Item #: GE9026447C3
Brand: Harvey Tool
Model #: 26447-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Cutting Width (CW) | 3/64″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 1-1/2″ |
| Coating | AlTiN |
$ 57.72
0.0620″ (1/16″) Cutter Diameter × 0.0620″ (1/16″) Width × 0.0930″ (3/32″) Neck Length Carbide Square Standard Keyseat Cutter, 4 Flutes, AlTiN Coated
Item #: GE9026462C3
Brand: Harvey Tool
Model #: 26462-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Cutting Width (CW) | 1/16″ |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Cutting Edge Material | Carbide |
| Overall Length (OAL) | 1-1/2″ |
| Coating | AlTiN |
$ 57.72
3 mm Dia. × 3 mm Shank × 25 mm DOC × 75 mm OAL, Carbide TiN, Spiral , 3 Flute, 30° Helix, Ballnose End Mill
Item #: DD9049583
Brand: KYOCERA SGS Precision Tools
Model #: 49583
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3 mm |
| Flute Count (NOF) | 3 |
| Connection Diameter Machine Side (DCONMS) | 3 mm |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 25 mm |
| Usable Length (LU) | 50 mm |
| Overall Length (OAL) | 75 mm |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Style | Ball Nose |
| Coating | TiN |
| Decimal Equivalent | 0.1181″ |
$ 57.62
3 mm Dia. × 3 mm Shank × 25 mm DOC × 75 mm OAL, Carbide AlTiN, Spiral , 3 Flute, 30° Helix, Ballnose End Mill
Item #: DD9049609
Brand: KYOCERA SGS Precision Tools
Model #: 49609
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3 mm |
| Flute Count (NOF) | 3 |
| Connection Diameter Machine Side (DCONMS) | 3 mm |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 25 mm |
| Usable Length (LU) | 50 mm |
| Overall Length (OAL) | 75 mm |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Style | Ball Nose |
| Coating | AlTiN |
| Decimal Equivalent | 0.1181″ |
$ 57.62
0.8 × 4 × 1.2(6) × 45 X-Power 2Fl Rib Ball Nose End Mill
Item #: YG33GM886008
Brand: YG-1 Cutting Tools
Model #: GM886008
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.8 mm |
| Shank Type | Plain |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| Usable Length (LU) | 6 mm |
| Depth of Cut Maximum (APMX) | 1.2 mm |
| Applicable Material | Steel |
| Overall Length (OAL) | 45 mm |
| Tool Type | Ballnose Endmill |
| Cutting Edge Material | Carbide |
| Length Group | Rib Processing |
| Coating | Y-Coating |
| End Shape | Ball Nose |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | GM886 |
$ 58.35
ECI-5 .25-1.C.03VF3 IC608
Item #: EH563398421
Brand: Iscar
Model #: 3398421
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Application | Helical Interpolation | Plunging & Recessing | Rampdown | Shouldering | Slotting |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Corner Radius (RE) | 0.03″ |
| Depth of Cut Maximum (APMX) | 1″ |
| Grade | IC608 |
| Overall Length (OAL) | 3″ |
| Tool Type | Solid carbide non center cutting endmills 90 Degrees |
| Cutting Edge Material | Carbide |
| Maximum Feed per Tooth (fz(max)) | 0.0017 ″/tooth |
| Coating | AlTiCrSiN |
| Minimum Feed per Tooth (fz(min)) | 0.0007 ″/tooth |
| Flute Count (NOF) | 5 |
| Body Material | Carbide |
| Shank Type | Round |
| Decimal Equivalent | 0.25″ |
| End Shape | Corner Radius |
| Measurement Type | Inch |
| Usable Length (LU) | 1″ |
| Connection Code Machine Side (CCMS) | Cylindrical |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Hi Temp Alloys | |
$ 55.14
ECI-5 .25-1.W.015VF3 IC608
Item #: EH563408236
Brand: Iscar
Model #: 3408236
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Application | Helical Interpolation | Plunging & Recessing | Rampdown | Shouldering | Slotting |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Corner Radius (RE) | 0.015″ |
| Depth of Cut Maximum (APMX) | 1″ |
| Grade | IC608 |
| Overall Length (OAL) | 3″ |
| Tool Type | Solid carbide non center cutting endmills 90 Degrees |
| Cutting Edge Material | Carbide |
| Maximum Feed per Tooth (fz(max)) | 0.0017 ″/tooth |
| Coating | AlTiCrSiN |
| Minimum Feed per Tooth (fz(min)) | 0.0007 ″/tooth |
| Flute Count (NOF) | 5 |
| Body Material | Carbide |
| Shank Type | Weldon |
| Decimal Equivalent | 0.25″ |
| End Shape | Corner Radius |
| Measurement Type | Inch |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Hi Temp Alloys | |
$ 55.14
ECI-5 .25-1.W.03VF3 IC608
Item #: EH563408237
Brand: Iscar
Model #: 3408237
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Application | Helical Interpolation | Plunging & Recessing | Rampdown | Shouldering | Slotting |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Corner Radius (RE) | 0.03″ |
| Depth of Cut Maximum (APMX) | 1″ |
| Grade | IC608 |
| Overall Length (OAL) | 3″ |
| Tool Type | Solid carbide non center cutting endmills 90 Degrees |
| Cutting Edge Material | Carbide |
| Maximum Feed per Tooth (fz(max)) | 0.0017 ″/tooth |
| Coating | AlTiCrSiN |
| Minimum Feed per Tooth (fz(min)) | 0.0007 ″/tooth |
| Flute Count (NOF) | 5 |
| Body Material | Carbide |
| Shank Type | Weldon |
| Decimal Equivalent | 0.25″ |
| End Shape | Corner Radius |
| Measurement Type | Inch |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Hi Temp Alloys | |
$ 55.14
EBI-5 .25-1.WVF3 IC608
Item #: EH563408468
Brand: Iscar
Model #: 3408468
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Application | | Helical Interpolation | Plunging & Recessing | Profiling | Rampdown | Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Corner Radius (RE) | 1/8″ |
| Depth of Cut Maximum (APMX) | 1″ |
| Grade | IC608 |
| Overall Length (OAL) | 3″ |
| Tool Type | Solid carbide non center cutting endmills 90° |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | AlTiCrSiN |
| Decimal Equivalent | 0.25″ |
| Flute Count (NOF) | 5 |
| Measurement Type | Inch |
| Shank Type | Weldon |
| Connection Code Machine Side (CCMS) | Weldon |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Hi Temp Alloys | |
$ 55.14
5/16″ Dia. × 5/16″ Shank × 13/16″ DOC × 2-1/2″ OAL, Carbide, Duarise, 4 Flute, Shrink Fit, Square, Solid End Mill
Item #: TP4682000421
Brand: OSG USA, Inc.
Model #: 82000421
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Shank Type | Shrink Fit |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| End Shape | Square |
| Depth of Cut Maximum (APMX) | 13/16″ |
| Tool Type | High Performance |
| Overall Length (OAL) | 2-1/2″ |
| Decimal Equivalent | 0.3125″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | Duarise |
| Series/List # | 8200 |
| Flute Count (NOF) | 4 |
| Shank Length (LS) | Regular |
$ 50.96
VFSDD0350 SOLID CARBIDE EM
Item #: MB03379874
Brand: Mitsubishi Materials USA
Model #: 379874
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3.5 mm |
| End Shape | Center Cutting |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Body Half Taper Angle (BHTA) | 15 Degrees |
| Depth of Cut Maximum (APMX) | 7 mm |
| Peripheral Effective Cutting Edge Count (ZEFP) | 6 |
| Overall Length (OAL) | 45 mm |
| Length Group | Short |
| Coating | VF |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 45 Degrees |
| Series/List # | VFSD |
$ 61.22
VFSDD0400 SOLID CARBIDE EM
Item #: MB03379882
Brand: Mitsubishi Materials USA
Model #: 379882
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 4 mm |
| End Shape | Center Cutting |
| Connection Diameter Machine Side (DCONMS) | 6 mm |
| Body Half Taper Angle (BHTA) | 15 Degrees |
| Depth of Cut Maximum (APMX) | 8 mm |
| Peripheral Effective Cutting Edge Count (ZEFP) | 6 |
| Overall Length (OAL) | 45 mm |
| Length Group | Short |
| Coating | VF |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 45 Degrees |
| Series/List # | VFSD |
$ 61.22
VF2XLBR0030N025S04 SOLID CARB EM
Item #: MB03424188
Brand: Mitsubishi Materials USA
Model #: 424188
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.6 mm |
| Usable Length (LU) | 2.5 mm |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| Corner Radius (RE) | 0.3 mm |
| Depth of Cut Maximum (APMX) | 0.48 mm |
| Neck Diameter (DN) | 0.56 mm |
| Overall Length (OAL) | 50 mm |
| Body Half Taper Angle (BHTA) | 12 Degrees |
| Coating | VF |
| Peripheral Effective Cutting Edge Count (ZEFP) | 2 |
| Flute Count (NOF) | 2 |
| Length Group | Long - Necked |
| Flute Helix Angle (FHA) | 30 Degrees |
| Measurement Type | Metric |
| End Shape | Ball |
| Series/List # | VF2XLB |
$ 61.39
0.6 mm Dia. × 4 mm Shank × 0.48 mm DOC × 50 mm OAL, Carbide Impact Miracle, 2 Flute, 30° Helix, Ballnose End Mill VF2XLBR0030N035S04
Item #: MB03424196
Brand: Mitsubishi Materials USA
Model #: 424196
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.6 mm |
| Corner Radius (RE) | 0.3 mm |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| Neck Diameter (DN) | 0.56 mm |
| Depth of Cut Maximum (APMX) | 0.48 mm |
| Body Half Taper Angle (BHTA) | 12 Degrees |
| Overall Length (OAL) | 50 mm |
| Tool Type | Solid Carbide Endmill |
| Cutting Edge Material | Carbide |
| Length Group | Long - Necked |
| Coating | VF |
| End Shape | Ball Nose |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | VF2XLB |
| Usable Length (LU) | 3.5 mm |
$ 61.39
VF2XLBSR0030N020 SOLID CARBIDE EM
Item #: MB03510297
Brand: Mitsubishi Materials USA
Model #: 510297
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.6 mm |
| Usable Length (LU) | 2 mm |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| Corner Radius (RE) | 0.3 mm |
| Depth of Cut Maximum (APMX) | 0.48 mm |
| Neck Diameter (DN) | 0.56 mm |
| Overall Length (OAL) | 40 mm |
| Body Half Taper Angle (BHTA) | 15 Degrees |
| Coating | VF |
| Peripheral Effective Cutting Edge Count (ZEFP) | 2 |
| Flute Count (NOF) | 2 |
| Length Group | Long - Necked |
| Flute Helix Angle (FHA) | 30 Degrees |
| Measurement Type | Metric |
| End Shape | Ball |
| Series/List # | VF2XLBS |
$ 61.30
0.6 mm Dia. × 4 mm Shank × 0.48 mm DOC × 40 mm OAL, Carbide 2 Flute, 30° Helix, Ballnose End Mill VF2XLBSR0030N030
Item #: MB03510300
Brand: Mitsubishi Materials USA
Model #: 510300
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.6 mm |
| Corner Radius (RE) | 0.3 mm |
| Connection Diameter Machine Side (DCONMS) | 4 mm |
| Neck Diameter (DN) | 0.56 mm |
| Depth of Cut Maximum (APMX) | 0.48 mm |
| Body Half Taper Angle (BHTA) | 15 Degrees |
| Overall Length (OAL) | 40 mm |
| Tool Type | Solid Carbide Endmill |
| Cutting Edge Material | Carbide |
| Length Group | Long - Necked |
| Coating | VF |
| End Shape | Ball Nose |
| Flute Count (NOF) | 2 |
| Measurement Type | Metric |
| Flute Helix Angle (FHA) | 30 Degrees |
| Series/List # | VF2XLBS |
| Usable Length (LU) | 3 mm |
$ 61.30