ET01 and ET02 - (25001 Products)
#VB604S1 -- 3 x 4 x 3'' - 60° V-Block & Clamp Set
Item #: NJ50VB604S1
Manufacturer: Suburban
Mfg #: VB604S1
Technical Specifications:
•Brand Name: Suburban
•Capacity: 2-1/4
•Model Number: VB604S1
•Number of Blocks: 1
•Size: 3 x 4 x 3
•Squareness: .0002
•Type: 60° V-Block & Clamp Set
•Weight: 9 lbs
Description:
•All vee blocks are parallel, square and central within .0002
•Each block comes with one clamp and blocks are available in matched pairs
•All models are made of hardened steel.
Shipping Info:
•Actual Weight - 8.0000
•Dimensions - Height: 4.00 Length: 6.00 Width: 4.00
566 MAG V-BLOCK
Item #: MV7063323
Manufacturer: Starrett
Mfg #: 63323
Technical Specifications:
•Brand Name: Starrett
•Model Number: 566
Description:
Shipping Info:
•Actual Weight - 5.2000
Vee Accepts 3/16 to 5" Dia - Micro-Rise V-Blocks
Item #: GG4516505
Manufacturer: Flexbar
Mfg #: 16505
Technical Specifications:
•Brand Name: Flexbar
•Fits: 3/16 to 5" Diameters
•Type: Micro-Rise V-Block
Description:
•Hardened and ground anvils support up to 1,000 lbs.
•Wide angle "V" accepts 3/16 to 5 diameters Insures solid support without deflection
Shipping Info:
•Actual Weight - 4.6500
•Dimensions - Height: 3.30 Length: 4.70 Width: 4.30
#568C - 2 x 3 x 2-1/2'' - V-Block & Clamp Matched Set
Item #: MV7052592
Manufacturer: Starrett
Mfg #: 52592
Technical Specifications:
•Brand Name: Starrett
•Capacity: 2
•Description: V-Block and Clamps (Matched Pair)
•Model Number: 568C
•Number of Blocks: 2
•Size: 2 x 3 x 2-1/2
•Type: V-Blocs & Clamp Matched Set
Description:
•Wide Range V-Blocks
•Clamp can be mounted on V block in low or high position for small or large work. Clamps do not project; block can be used on base, ends or sides. Block holds round work up to 2diameter and square work up to 1-7/16(or 1-9/16square with screw at top). Tapped holes for mounting the V block on face plates or angle irons. V block is made of hardened steel. All sides are precision ground parallel and square and V-groove ground central and parallel to sides and base. V-grooves of matched pairs have perfect alignment.
Shipping Info:
•Actual Weight - 6.4500
•Dimensions - Height: 3.60 Length: 6.30 Width: 3.50
#VB604 - 3 x 4 x 3'' - 60° V-Block & Clamp Set
Item #: NJ50VB604
Manufacturer: Suburban
Mfg #: VB604
Technical Specifications:
•Brand Name: Suburban
•Capacity: 2-1/4
•Model Number: VB604
•Number of Blocks: 1
•Size: 3 x 4 x 3
•Squareness: .0002
•Type: 60° V-Block & Clamp Set
•Weight: 8 lbs
Description:
•Precision Ground Vee Blocks
•All vee blocks are parallel, square and central within .0002. Each block comes with one clamp and blocks are available in matched pairs. All models are made of hardened steel.
Shipping Info:
•Actual Weight - 8.0000
•Dimensions - Height: 4.00 Length: 6.00 Width: 4.00
2" MATCHED V-BLOCK SUBURBAN
Item #: NJ50VB222M
Manufacturer: Suburban
Mfg #: VB222M
Technical Specifications:
•Brand Name: Suburban
Description:
Shipping Info:
•Actual Weight - 6.0000
•Dimensions - Height: 4.00 Length: 8.00 Width: 4.00
599-745 V-BLOCK AND CLAMP
Item #: MV4544530
Manufacturer: Brown & Sharpe
Mfg #: 599-745
Technical Specifications:
•Brand Name: Brown & Sharpe
•Model Number: 599-745
Description:
Shipping Info:
•Actual Weight - 2.0760
#VB602S0 - 2-1/2 x 2-1/2 x 2'' - 60° V-Block & Clamp Set
Item #: NJ50VB602S0
Manufacturer: Suburban
Mfg #: VB602S0
Technical Specifications:
•Brand Name: Suburban
•Capacity: 1-3/8
•Model Number: VB602S0
•Number of Blocks: 1
•Size: 2-1/2 x 2-1/2 x 2
•Squareness: .0002
•Type: 60° V-Block & Clamp Set
•Weight: 3 lbs
Description:
•All vee blocks are parallel, square and central within .0002
•Each block comes with one clamp and blocks are available in matched pairs
•All models are made of hardened steel.
Shipping Info:
•Actual Weight - 3.0000
•Dimensions - Height: 4.00 Length: 6.00 Width: 4.00
Vee Accepts 3/32-5" Dia - Pair Ball Bearing V-Blocks
Item #: GG4516094
Manufacturer: Flexbar
Mfg #: 16094
Technical Specifications:
•Brand Name: Flexbar
•Capacity: 2-1/2
•Diameter: 15/16
•Fits: 3/32 to 5" Dia.
•Size: 3-3/8 x 3-3/8 x 1-3/8
•Type: Pair Ball Bearing V-Block
•Weight: 1100 lbs
Description:
•Enables you to inspect and detect out-of-roundconditions and lobes with no damage to parts and no damage to blocks
•Special Features: Accuracy of Balls: 25 Millionth of an inch sphericity on small and medium set. 50 Millionths of an inch on large set Overall accuracy of matched pairs 5 microns Balls Rockwell C-62 - Surface finish 0.2 microinch
Shipping Info:
•Actual Weight - 10.0000
#599-749-100 - 1-3/4 x 1-5/8 x 2-3/4'' - Mini V-Block
Item #: MV4526913
Manufacturer: Brown & Sharpe
Mfg #: 599-749-10
Technical Specifications:
•Brand Name: Brown & Sharpe
•Capacity: .030 - 9/32
•Model Number: 599-749-100
•Number of Blocks: 2
•Size: 1-3/4 x 1-5/8 x 2-3/4
•Type: Mini V-Block
Description:
•Unique universal holding tool for small, miniature, or intricate parts. Ideal holding fixture for grinding/indexing punches and pins, drilling, milling, EDM, inspection on optical comparators.
•Capacity .030 to 9/32
•Furnished with bridges to straddle long workpieces, allowing top hold-down screw of V-Block clamp to be utilized
•Hardened and high precision ground Wee Blocks, squareness and parallelism within .0002
•Set contains 2 Ultra Wee-Vee Blocks, size A .030 - 5/32 cap, and size B .050 - 9/32 cap., Bridge A and B, plus 5 Upper Prisms, 1/8 , 5/32 , and 3/16 cap., all in a fitted case
Shipping Info:
•Actual Weight - 4.9000
#567 - 1-7/8 x 1-7/8 x 3'' - V-Block & Clamp Set
Item #: MV7052588
Manufacturer: Starrett
Mfg #: 52588
Technical Specifications:
•Brand Name: Starrett
•Description: Set Complete, with One V Block and One Clamp
•Model Number: 567
•Number of Blocks: 1
•Size: 1-7/8 x 1-7/8 x 3
•Type: V-Block & Clamp Set
Description:
•Can be used on base, end, and flat on either side as clamp is within outside width of block. Clamp is provided with an adjustable side screw with caps to support block and prevent tilting. Groove at stepped end at right angle to base and is handy for holding shouldered studs, round pins, etc. Hole clearance for drilling and remove dowel pins provided. Block has four 3/8-16 tapped holes, two in base and one on each side to attach angle iron. Angle iron holding block can then be attached to lathe face-plate or held by magnetic chuck. Block made of hardened steel. Sides are ground parallel and the groove central and parallel to sides and base. Size 1-7/8 inches square, base length about 3-1/2 inches.
Shipping Info:
•Actual Weight - 2.1500
•Dimensions - Height: 3.70 Length: 6.30 Width: 3.50
#VEB12 - 12 x 8 x 7'' - Cast Iron V-Block
Item #: NG54VEB12
Manufacturer: Procheck
Mfg #:
Technical Specifications:
•Brand Name: Procheck
•Capacity: 6-1/2
•Model Number: VEB12
•Number of Blocks: 2
•Size: 12 x 8 x 7
•Type: Cast Iron V-Block
Description:
•These vee blocks are manufactured from high quality close-grained gray iron castings seasoned as a precaution against distortion and accurately machined to very close tolerances.
•They are supplied in matched pairs, each block having a truly centered 90° vee.
Shipping Info:
•Commercial Truck - Call for Shipping Charges
•Actual Weight - 147.0000
•Dimensions - Height: 11.0 Length: 16.5 Width: 15.0
#VB602 - 2-1/2 x 2-1/2 x 2'' - 60° V-Block & Clamp Set
Item #: NJ50VB602
Manufacturer: Suburban
Mfg #: VB602
Technical Specifications:
•Brand Name: Suburban
•Capacity: 1-3/8
•Model Number: VB602
•Number of Blocks: 1
•Size: 2-1/2 x 2-1/2 x 2
•Squareness: .0002
•Type: 60° V-Block & Clamp Set
•Weight: 3 lbs
Description:
•All vee blocks are parallel, square and central within .0002
•Each block comes with one clamp and blocks are available in matched pairs
•All models are made of hardened steel.
Shipping Info:
•Actual Weight - 3.0000
•Dimensions - Height: 4.00 Length: 6.00 Width: 4.00
599-9750-2 V-BLOCK & CLAMP
Item #: MV4545211
Manufacturer: Brown & Sharpe
Mfg #: 599-9750-2
Technical Specifications:
•Brand Name: Brown & Sharpe
•Model Number: 599-9750-2
Description:
Shipping Info:
#599-749-1 - 2-1/2 x 2-1/2 x 3'' - V-Block & Clamp Set
Item #: MV4544533
Manufacturer: Brown & Sharpe
Mfg #: 599-749-1
Technical Specifications:
•Brand Name: Brown & Sharpe
•Capacity: 1/2 to 2-1/2
•Model Number: 599-749-1
•Number of Blocks: 2
•Size: 2-1/2 x 2-1/2 x 3
•Squareness: .003
•Type: V-Block & Clamp Set
Description:
•For larger and heavier work. Made in numbered pairs from mild steel. Set consists of two blocks and one clamp. Blocks feature two clamping grooves. Lower grooves permit blocks to be clamped to table. Dimensions: 2-1/2 square 3 long. Work capacity of approx. 1/2 to 2-1/2 diameter. Accuracy: Sides are square with each other within .003 . Ends are square with sides within .003 . V groove is parallel and central with sides within .002 . V groove is 90° 1/2°. V s of pairs are central and parallel to each other within .004 .
Shipping Info:
•Actual Weight - 8.1500
•Dimensions - Height: 4.60 Length: 6.20 Width: 4.40
#VB334S1 - 3 x 4 x 3'' - 90° V-Block & Clamp Set
Item #: NJ50VB334S1
Manufacturer: Suburban
Mfg #: VB334S1
Technical Specifications:
•Brand Name: Suburban
•Capacity: 2-1/4
•Model Number: VB334S1
•Number of Blocks: 1
•Size: 3 x 4 x 3
•Squareness: .0002
•Type: 90° V-Block & Clamp Set
•Weight: 9 lbs
Description:
•All vee blocks are parallel, square and central within .0002
•Each block comes with one clamp and blocks are available in matched pairs
•All models are made of hardened steel.
Shipping Info:
•Actual Weight - 9.0000
•Dimensions - Height: 4.00 Length: 6.00 Width: 4.00
599-750-1 V-BLOCK & CLAMP 1 PAIR
Item #: MV4544534
Manufacturer: Brown & Sharpe
Mfg #: 599-750-1
Technical Specifications:
•Brand Name: Brown & Sharpe
•Model Number: 599-750-1
Description:
Shipping Info:
•Actual Weight - 1.6460
#278 - 1-1/4 x 1-1/4 x 1-5/8'' - V-Block & Clamp Set
Item #: MV7051312
Manufacturer: Starrett
Mfg #: 51312
Technical Specifications:
•Brand Name: Starrett
•Description: Set Complete, Two V Blocks (one pair) and Two Clamps
•Model Number: 278
•Number of Blocks: 2
•Size: 1-1/4 x 1-1/4 x 1-5/8
•Type: V-Block & Clamp Set
Description:
•V's are ground central, parallel and square with ends and sides. Made of tool steel and hardened. Manufactured and numbered in pairs, so that V s in each blocks are always in alignment. Tapped hole 1/4-20 through sides. Angle iron and blocks can then be attached to lathe face-plate or held by magnetic chuck. Each block about 1-1/4 inches square and 1-5/8 inches long.
Shipping Info:
•Actual Weight - 1.5000
•Dimensions - Height: 1.70 Length: 6.60 Width: 2.20
Vee Accepts 3/64-2-1/2" Dia - Pair Ball Bearing V-Blocks
Item #: GG4516093
Manufacturer: Flexbar
Mfg #: 16093
Technical Specifications:
•Brand Name: Flexbar
•Capacity: 1-1/4
•Diameter: 1/2
•Fits: 3/64 to 2-1/2" Dia.
•Size: 2 x 2 x 1
•Type: Pair Ball Bearing V-Block
•Weight: 220 lbs
Description:
•Enables you to inspect and detect out-of-roundconditions and lobes with no damage to parts and no damage to blocks
•Special Features: Accuracy of Balls: 25 Millionth of an inch sphericity on small and medium set. 50 Millionths of an inch on large set Overall accuracy of matched pairs 5 microns Balls Rockwell C-62 - Surface finish 0.2 microinch
Shipping Info:
•Actual Weight - 4.0000
#VB334 - 3 x 4 x 3'' - 90° V-Block & Clamp Set
Item #: NJ50VB334
Manufacturer: Suburban
Mfg #: VB334
Technical Specifications:
•Brand Name: Suburban
•Capacity: 2-1/4
•Model Number: VB334
•Number of Blocks: 1
•Size: 3 x 4 x 3
•Squareness: .0002
•Type: 90° V-Block & Clamp Set
•Weight: 9 lbs
Description:
•All vee blocks are parallel, square and central within .0002
•Each block comes with one clamp and blocks are available in matched pairs
•All models are made of hardened steel.
Shipping Info:
•Actual Weight - 9.0000
•Dimensions - Height: 4.00 Length: 6.00 Width: 4.00