#568A - 2 x 3 x 2-1/2'' - V-Block & Clamp Set

Item #: MV7052590
Manufacturer: Starrett
Mfg #: 52590

Technical Specifications:
•Brand Name: Starrett •Capacity: 2 •Description: V-Block and Clamp •Model Number: 568A •Number of Blocks: 1 •Size: 2 x 3 x 2-1/2 •Type: V-Block & Clamp Set

Description:
•Wide Range V-Blocks •Clamp can be mounted on V block in low or high position for small or large work. Clamps do not project; block can be used on base, ends or sides. Block holds round work up to 2diameter and square work up to 1-7/16(or 1-9/16square with screw at top). Tapped holes for mounting the V block on face plates or angle irons. V block is made of hardened steel. All sides are precision ground parallel and square and V-groove ground central and parallel to sides and base. V-grooves of matched pairs have perfect alignment.

Shipping Info:
•Actual Weight - 3.3500 •Dimensions - Height: 3.70 Length: 6.30 Width: 3.50

$ 335.48

#VEB10 - 10 x 6-5/8 x 5'' - Cast Iron V-Block

Item #: NG54VEB10
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 5 •Model Number: VEB10 •Number of Blocks: 2 •Size: 10 x 6-5/8 x 5 •Type: Cast Iron V-Block

Description:
•Cast Iron V-Blocks •These vee blocks are manufactured from high quality close-grained gray iron castings seasoned as a precaution against distortion and accurately machined to very close tolerances.They are supplied in matched pairs, each block having a truly centered 90° vee.

Shipping Info:
•Actual Weight - 78.6500 •Dimensions - Height: 9.40 Length: 12.8 Width: 12.6 •Addl Fee Over 70lb-$23.00 per item

$ 306.34

#52-475-555-0 V-Block Universal Type

Item #: NA5552475555
Manufacturer: Fowler
Mfg #: 52-475-555

Technical Specifications:
•Brand Name: Fowler •Capacity: 2" (50mm) •Description: Two clamps with screw hole at 90 degrees for positive clamping of work, Height 2", Length 2 3/4", V-Blocks are constructed with stepped grooves which allow the clamps to be inserted without protrusion. Hardened steel. All sides of V-Blocks precision ground •Diameter: 2 •Model Number: 52-475-555-0 •Number of Blocks: 2 •Size: 2-3/4 x 2 x 2 •Squareness: .0004 •Type: V-Block Set •Weight: 5.75

Description:
•Two clamps with screw hole at 90° included •2" Clamping capacity •Constructed with stepped grooves allowing the clamps to be inserted without protrusion, thus allowing the V-block to be used on base, ends or sides •Hardened steel •Measures 2-3/4 x 2 x 2" •Matched pair of V-blocks are perfectly aligned with 90° V-grooves ground central and parallel to the sides and base within .0004" accuracy

Shipping Info:
•Actual Weight - 5.5000 •Dimensions - Height: 3.00 Length: 10.5 Width: 8.00

$ 309.96

#VB222S0 - 2-1/2 x 2-1/2 x 2'' - 90° V-Block & Clamp Set

Item #: NJ50VB222S0
Manufacturer: Suburban
Mfg #: VB222S0

Technical Specifications:
•Brand Name: Suburban •Capacity: 1-3/8 •Model Number: VB222S0 •Number of Blocks: 1 •Size: 2-1/2 x 2-1/2 x 2 •Squareness: .0002 •Type: 90° V-Block & Clamp Set •Weight: 3 lbs

Description:
•All vee blocks are parallel, square and central within .0002 •Each block comes with one clamp and blocks are available in matched pairs •All models are made of hardened steel.

Shipping Info:
•Actual Weight - 3.0000 •Dimensions - Height: 4.00 Length: 6.00 Width: 4.00

$ 324.26

#52-585-090 - 1-3/4 x 2 x 3-3/4'' - Adjustable V-Block

Item #: NA5552585090
Manufacturer: Fowler
Mfg #: 52-585-090

Technical Specifications:
•Brand Name: Fowler •Model Number: 52-585-090 •Number of Blocks: 1 •Size: 1-3/4 x 2 x 3-3/4 •Squareness: .0002 •Type: Adjustable V-Block

Description:
•Hardened and precision ground •3.75 L x 1.75 W x 2 H and offers approximately 1.75 work space •Ideal for setup, milling, grinding and drilling applications •Angle accuracy 10 sec. •Comes complete in deluxe fitted wooden case

Shipping Info:
•Actual Weight - 6.0000 •Dimensions - Height: 4.50 Length: 7.00 Width: 4.50

$ 282.43

#599-749 - 1-1/2 x 1-1/2 x 2'' - V-Block & Clamp Set

Item #: MV4544532
Manufacturer: Brown & Sharpe
Mfg #: 599-749

Technical Specifications:
•Brand Name: Brown & Sharpe •Capacity: 1-1/2 •Model Number: 599-749 •Number of Blocks: 2 •Size: 1-1/2 x 1-1/2 x 2 •Squareness: .0035 •Type: V-Block & Clamp Set

Description:
•Made in numbered pairs from mild steel. Surfaces (except V) are square and parallel with each other within .002 . V grooves square and parallel with all surfaces within .0035 . Dimensions: 1-1/2 square 2 long. Work capacity of approx. 1-1/2 (40 mm) diameter.

Shipping Info:
•Actual Weight - 2.2080

$ 390.55

#VB222 - 2-1/2 x 2-1/2 x 2'' - 90° V-Block & Clamp Set

Item #: NJ50VB222
Manufacturer: Suburban
Mfg #: VB222

Technical Specifications:
•Brand Name: Suburban •Capacity: 1-3/8 •Model Number: VB222 •Number of Blocks: 1 •Size: 2-1/2 x 2-1/2 x 2 •Squareness: .0002 •Type: 90° V-Block & Clamp Set •Weight: 3 lbs

Description:
•All vee blocks are parallel, square and central within .0002 •Each block comes with one clamp and blocks are available in matched pairs •All models are made of hardened steel.

Shipping Info:
•Actual Weight - 3.0000 •Dimensions - Height: 4.00 Length: 6.00 Width: 4.00

$ 285.52

#VEB8 - 8 x 5-1/2 x 4'' - Cast Iron V-Block

Item #: NG54VEB8
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 4 •Model Number: VEB8 •Number of Blocks: 2 •Size: 8 x 5-1/2 x 4 •Type: Cast Iron V-Block

Description:
•These vee blocks are manufactured from high quality close-grained gray iron castings seasoned as a precaution against distortion and accurately machined to very close tolerances. •They are supplied in matched pairs, each block having a truly centered 90° vee.

Shipping Info:
•Actual Weight - 43.8500 •Dimensions - Height: 7.00 Length: 9.00 Width: 9.10

$ 175.45

4-3/4 x 4-3/4 x 2-3/8" Quadruple V-Block with 1-3/16; 1-9/16; and 2; and 3-3/8" Vees

Item #: NG54QVB4
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 1-3/16, 1-9/16, 2, 3-3/8 •Description: Quadruple V-Block •Number of Blocks: 2 •Size: 4-3/4 x 4-3/4 x 2-3/8 •Squareness: .0012 •Type: V-Blocks

Description:
•Made from seasoned closed grained cast iron •Universal V-block consisting of four different sized grooves •Supplied in pairs

Shipping Info:
•Actual Weight - 13.3500 •Dimensions - Height: 5.60 Length: 7.30 Width: 5.60

$ 164.02

#VB2 - 1-1/4 x 1-1/4 x 1-5/8'' - V-Block & Clamp Set

Item #: NG49VB2
Manufacturer: Fisher Machine
Mfg #: VB2

Technical Specifications:
•Brand Name: Fisher Machine •Capacity: 1 •Model Number: VB2 •Number of Blocks: 2 •Size: 1-1/4 x 1-1/4 x 1-5/8 •Squareness: .0002 •Type: V-Block & Clamp Set

Description:
•Capacity: Large vee 1 dia. Small vee 1/2 •Hardened and match ground •Square and parallel within .0002 •Two serial numbered vee block with clamps

Shipping Info:
•Actual Weight - 1.5500 •Dimensions - Height: 1.90 Length: 3.20 Width: 3.10

$ 181.51

#52-475-020 - 2-3/4 x 3-1/2 x 4-7/8'' - V-Block & Clamp Set

Item #: NG5352475020
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 2-1/8 •Model Number: 52-475-020 •Number of Blocks: 2 •Size: 2-3/4 x 3-1/2 x 4-7/8 •Type: V-Block & Clamp Set

Description:
•All sides are ground square and parallel to each other. Designed so the clamps do not protrude over the sides; thus the tool can be used on its sides. Matched accuracy .0002 90° vee s are ground central, parallel, and square with the ends precision ground, matched and numbered in pairs. •Hardened and ground chrome steel •Sold in precision matched pairs only •Compares with other V-Blocks costing twice as much

Shipping Info:
•Actual Weight - 21.3500 •Dimensions - Height: 6.80 Length: 6.50 Width: 4.40

$ 161.75

#52-475-500 - 1-1/4 x 1-1/4 x 1-1/2 & 1-1/2 x 1-1/2 x 2'' - V-Block & Clamp Set

Item #: NA5552475500
Manufacturer: Fowler
Mfg #: 52-475-500

Technical Specifications:
•Brand Name: Fowler •Model Number: 52-475-500 •Number of Blocks: 4 •Size: 1-1/4 x 1-1/4 x 1-1/2 &1-1/2 x 1-1/2 x 2 •Squareness: .0005 •Type: V-Block & Clamp Set

Description:
•Surfaces are square and parallel within .0005" •V-grooves are square and parallel with all surfaces within .0005" •Corresponding dimensions for each pair are alike within .0005" •All enclosed in shop-hardened case

Shipping Info:
•Actual Weight - 4.7500 •Dimensions - Height: 2.60 Length: 9.50 Width: 6.50

$ 143.53

#271C - 1-1/4 x 1-1/4 x 1-1/4'' - V-Block & Clamp Set

Item #: MV7051295
Manufacturer: Starrett
Mfg #: 51295

Technical Specifications:
•Brand Name: Starrett •Capacity: 13/16 •Description: Set Complete, Two V-Blocks (one pair) and Clamp •Model Number: 271C •Number of Blocks: 2 •Size: 1-1/4 x 1-1/4 x 1-1/4 •Type: V-Block & Clamp Set

Description:
•Case hardened and may be used singly or in pairs for milling and grinding operations. A removable 6-inch steel rod, held by friction bushings, keeps blocks in alignment and under work. Blocks are furnished in pairs each 1-1/4 inches square. Large V about 13/16 inch and small V about 13/32 inch across the mouth.

Shipping Info:
•Actual Weight - 1.1000 •Dimensions - Height: 1.73 Length: 6.60 Width: 2.16

$ 161.11

#NVB334 - 3 x 3 x 4"- Pair of V-Blocks & Clamps

Item #: NG52NVB334
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 9/32 to 1-9/16 •Model Number: NVB334 •Number of Blocks: 2 •Size: 3 x 3 x 4 •Type: V-Block & Clamp Set

Description:
•Precision made tool steel completely hardened and ground •A reversible swing-away clamp, combined with offset hole pattern, provides a variety of clamping possibilities •Blocks are slotted on sides to allow easy clamping to any surface.

Shipping Info:
•Actual Weight - 15.7500 •Dimensions - Height: 5.00 Length: 7.30 Width: 5.20

$ 175.39

#578B - Fits: 578A - Extra V-Block Clamp Only

Item #: MV7064988
Manufacturer: Starrett
Mfg #: 64988

Technical Specifications:
•Brand Name: Starrett •Description: Clamp Only •Fits: 578A •Model Number: 578B •Type: Extra V-Block Clamp Only

Description:
•V-Block and Clamp •This V-block will handle round work up to a diameter of 4with the same precision and accuracy of other Starrett V-blocks. The block can be used on its side or on its end for machining or inspection, with no interference from the clamp. A reversible swing-away style clamp that clamps against almost any shape of product part is furnished with the unit. The three tapped hole positions in the V-block for the clamp allows the clamp to be positioned at either end or at the center of the V-block. Two tapped holes in one end of the V-block provide for mounting it perpendicular to a face plate. Clearance holes in the bottom provide for mounting the V-block to angle plates or other fixturing. The block is 5-1/4wide, 3 , high and 3-3/8long and made of hardened steel that has been precision ground. The clamp is also made from hardened steel. Each V-block is furnished with two clamp screws.

Shipping Info:
•Actual Weight - 1.1000

$ 151.94

#52-475-025 - 1-3/8 x 1-3/8 x 1-3/16'' - X-Block Jr V-Block Set

Item #: NA5552475025
Manufacturer: Fowler
Mfg #: 52-475-025

Technical Specifications:
•Brand Name: Fowler •Model Number: 52-475-025 •Number of Blocks: 2 •Size: 1-3/8 x 1-3/8 x 1-3/16 •Squareness: .0003 •Type: X-Blok Jr.

Description:
•X-Blox-Jr. Dimensions: 1-3/8x 1-3/8x 1-3/16Reversible swing-away clamps Versatile clamp, plus unique offset hole pattern in top of blocks, offers a large variety of clamping possibilities All blox are hardened and ground, squareness and parallelism within .0003Set capacity: .030 - 1.285 •Mini Vee: Use this universal holding tool for small, miniature or intricate parts.

Shipping Info:
•Actual Weight - 1.0000

$ 139.48

#APS2 - 60° Angle - Sine Angle Block

Item #: NG52APS2
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Model Number: APS2 •Size: 1-3/16 x 2-3/8 x 4 •Type: 60° Precision Sine Angle Block

Description:
•60° Precision Sine Angle Block •Diameter of Rolls 5/8" •Height of Block Including Rolls 2-3/4"

Shipping Info:
•Actual Weight - 2.2000 •Dimensions - Height: 2.30 Length: 4.80 Width: 3.90

$ 136.38

#E934 - 2-3/4 x 3-3/4 x 4'' - Magnetic V-Block

Item #: NH50E934
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Model Number: E934 •Number of Blocks: 1 •Size: 2-3/4 x 3-3/4 x 4 •Type: Magnetic V-Block •Weight: 9.5 lbs

Description:
•Holds both itself and the works on any flat ferrous surface, including a permanent magnet chuck (without energizing the chuck). •There are two vees, the smaller for workpiece up to 3" diameter, and the larger for workpieces up to 2" diameter. •The vees and faces are energized or de-energized simultaneously by turning the control handle •The vee block can be used either way; up or standing on end.

Shipping Info:
•Actual Weight - 8.3000 •Dimensions - Height: 3.90 Length: 5.10 Width: 3.00

$ 118.38

#KVH-2 - 2-3/8 x 2-7/8 x 4-7/8'' - Magnetic V-Block

Item #: NG50KVH2
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Model Number: KVH-2 •Number of Blocks: 1 •Size: 2-3/8 x 2-7/8 x 4-7/8 •Type: Magnetic V-Block

Description:
•For round or odd-shaped pieces •Grinding-machining •Scribing-measuring •Lifetime magnets •Usable on 4 surfaces

Shipping Info:
•Actual Weight - 6.9000 •Dimensions - Height: 3.10 Length: 6.10 Width: 2.60

$ 112.08

#NVB7502 - 2-1/2 x 2-3/4 x 2'' - V-Block & Clamp Set

Item #: NG52NVB7502
Manufacturer: Procheck
Mfg #:

Technical Specifications:
•Brand Name: Procheck •Capacity: 2 •Model Number: NVB7502 •Number of Blocks: 2 •Size: 2-1/2 x 2-3/4 x 2 •Type: V-Block & Clamp Set

Description:
•Stepped groove construction permits low or high clamping •Holds square or round work •Hardened steel •All sides precision ground parallel and square •Capacity: 2 round 1-7/16 square

Shipping Info:
•Actual Weight - 5.5500 •Dimensions - Height: 3.90 Length: 7.10 Width: 5.30

$ 114.46