Comet 10 x 50 Knee Powerfeed Type 140

Item #: JD80M9813140
Manufacturer: Servo
Mfg #:

Technical Specifications:
•Brand Name: Servo •Model Number: M9813140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approx. weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 21.0000

$ 963.62

Acra 10 x 50 Knee Powerfeed Type 140

Item #: JD80M5080140
Manufacturer: Servo
Mfg #:

Technical Specifications:
•Brand Name: Servo •Model Number: M5080140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approx. weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 21.0000

$ 1,053.35

TPFA-X; X-Axis Table Powerfeed

Item #: PY60350194
Manufacturer: Jet
Mfg #: 350194

Technical Specifications:
•Brand Name: Jet •Description: X-Axis Table Powerfeed •Model Number: 350194

Description:
•JET X-Axis Table Powerfeed •Specially designed for each model •X, Y, & Z-axis available •Provides continuously variable feed rate of up to 32 in./min. •Adjustable stops allow automatic shut off •Includes rapid traverse button •Built-in clutch helps prevent damage in overload •Factory installation available •installation of powerfeed will reduce table travel •2 Year Warranty

Shipping Info:
•Actual Weight - 12.7600 •Addl Fee Under 70lb -$14.25 per item

$ 906.51

TPFA-Y; Y-Axis Table Powerfeed

Item #: PY60350195
Manufacturer: Jet
Mfg #: 350195

Technical Specifications:
•Brand Name: Jet •Description: Y-Axis Table Powerfeed •Model Number: 350195

Description:
•JET Y-Axis Table Powerfeed •Specially designed for each model •X, Y, & Z-axis available •Provides continuously variable feed rate of up to 32 in./min. •Adjustable stops allow automatic shut off •Includes rapid traverse button •Built-in clutch helps prevent damage in overload •Factory installation available •installation of powerfeed will reduce table travel •2 Year Warranty

Shipping Info:
•Actual Weight - 12.7600 •Addl Fee Under 70lb -$14.25 per item

$ 906.51

Cross Power Feed - 140 inch/lbs; For Acer 3VS & 3VK

Item #: JD80M9508140
Manufacturer: Servo
Mfg #: M-9508-140

Technical Specifications:
•Brand Name: Servo •Description: Y-Axis Cross Feed •For Use With: Acer 3VS & 3VK, Kent 3VK, 4VK & 5VK •Model Number: M-9508-140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approx. weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 16.2000 •Dimensions - Height: 23.4 Length: 8.00 Width: 12.4

$ 1,053.35

Type 140 Power Feed - Z-Axis

Item #: JD80M2380140
Manufacturer: Servo
Mfg #: M-2380-140

Technical Specifications:
•Brand Name: Servo •Description: Z-Axis •For Use With: Birmingham 942,1050 •Model Number: M-2380-140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 16.0000

$ 961.58

Type 150 Power Feed - X-Axis

Item #: JD80M9109150
Manufacturer: Servo
Mfg #: M-9109-150

Technical Specifications:
•Brand Name: Servo •Description: X-Axis Table Feed •For Use With: Birmingham 942, 1050, Kent 2S •Model Number: M-9109-150 •Type: 150

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (full-wave SCR control compound DC motor): to 150 in.- lb. / 17 NM torque •Intermittent Torque: 120 in.- lb. / 13.6 NM •Continuous Torque: 100 in.- lb. / 11.3 NM •Variable Feed Rate: .50-35 IPM / 13-889 mm/min •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approx. weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 16.0000

$ 1,010.52

Table Power Feed - 150 inch/lbs; For HMV

Item #: JD80M4300150
Manufacturer: Servo
Mfg #: M-4300-150

Technical Specifications:
•Brand Name: Servo •Description: 150 inch/lbs •For Use With: Sharp HMV •Model Number: M-4300-150 •Type: 150

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (full-wave SCR control compound DC motor): to 150 in.- lb. / 17 NM torque •Intermittent Torque: 120 in.- lb. / 13.6 NM •Continuous Torque: 100 in.- lb. / 11.3 NM •Variable Feed Rate: .50-35 IPM / 13-889 mm/min •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 21.0000

$ 1,049.27

Cross Power Feed - For Bridgeport; Millport

Item #: JD80M0250150
Manufacturer: Servo
Mfg #: M-0250-150

Technical Specifications:
•Brand Name: Servo •Description: Y-Axis Cross Feed •For Use With: Bridgeport 12" Cross Travel •Model Number: M-0250-150 •Type: 150

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (full-wave SCR control compound DC motor): to 150 in.- lb. / 17 NM torque •Intermittent Torque: 120 in.- lb. / 13.6 NM •Continuous Torque: 100 in.- lb. / 11.3 NM •Variable Feed Rate: .50-35 IPM / 13-889 mm/min •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 18.6200

$ 1,080.88

Acra 10 x 50 Y-Axis Type 140 Powerfeed

Item #: JD80M5050140
Manufacturer: Servo
Mfg #:

Technical Specifications:
•Brand Name: Servo •Model Number: M5050140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approx. weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 21.0000

$ 1,053.35

Table Power Feed - 150 inch/lbs; For Acer 3VS & 3VK

Item #: JD80M9108150
Manufacturer: Servo
Mfg #: M-9108-150

Technical Specifications:
•Brand Name: Servo •Description: X-Axis Table Feed •For Use With: Acer 3VS & 3VK, Kent 3VK, 4VK & 5VK •Model Number: M-9108-150 •Type: 150

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (full-wave SCR control compound DC motor): to 150 in.- lb. / 17 NM torque •Intermittent Torque: 120 in.- lb. / 13.6 NM •Continuous Torque: 100 in.- lb. / 11.3 NM •Variable Feed Rate: .50-35 IPM / 13-889 mm/min •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approx. weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 13.7000 •Dimensions - Height: 15.0 Length: 12.6 Width: 7.40

$ 1,015.62

Alliant RT2-50 X-Axis Type 150 Powerfeed

Item #: JD80M9118150
Manufacturer: Servo
Mfg #:

Technical Specifications:
•Brand Name: Servo •Model Number: M9118150 •Type: 150

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 21.0000

$ 1,042.13

Table Power Feed - 150 inch/lbs; For Clausing/Kondia

Item #: JD80M4900150
Manufacturer: Servo
Mfg #: M-4900-150

Technical Specifications:
•Brand Name: Servo •Description: 150 inch/lbs •For Use With: Clausing/Kondia •Model Number: M-4900-150 •Type: 150

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (full-wave SCR control compound DC motor): to 150 in.- lb. / 17 NM torque •Intermittent Torque: 120 in.- lb. / 13.6 NM •Continuous Torque: 100 in.- lb. / 11.3 NM •Variable Feed Rate: .50-35 IPM / 13-889 mm/min •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 16.2150

$ 1,074.76

Cross Power Feed - 140 inch/lbs; For Willis

Item #: JD80M4250140
Manufacturer: Servo
Mfg #: M-4250-140

Technical Specifications:
•Brand Name: Servo •Description: Y-Axis Cross Feed •For Use With: Willis-WM2VS, 1050 & 1750 •Model Number: M-4250-140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 21.0000

$ 929.97

M4200150 Microcut X-Axis Type 150 Powerfeed

Item #: JD80M4200150
Manufacturer: Servo
Mfg #:

Technical Specifications:
•Brand Name: Servo •Model Number: M4200150 •Type: 150

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (full-wave SCR control compound DC motor): to 150 in.- lb. / 17 NM torque •Intermittent Torque: 120 in.- lb. / 13.6 NM •Continuous Torque: 100 in.- lb. / 11.3 NM •Variable Feed Rate: .50-35 IPM / 13-889 mm/min •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 21.0000

$ 1,023.78

Knee Power Feed - 140 inch/lbs; For Clausing/Kondia

Item #: JD80M1380140
Manufacturer: Servo
Mfg #: M-1380-140

Technical Specifications:
•Brand Name: Servo •Description: Z-Axis Knee Feed •For Use With: Clausing/Kondia •Model Number: M-1380-140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 15.0000

$ 1,047.23

Cross Power Feed - 140 inch/lbs; For HMV

Item #: JD80M4350140
Manufacturer: Servo
Mfg #: M-4350-140

Technical Specifications:
•Brand Name: Servo •Description: 140 inch/lbs •For Use With: Sharp HMV •Model Number: M-4350-140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 21.0000

$ 1,021.74

Type 150 Power Feed - X-Axis

Item #: JD80M9130150
Manufacturer: Servo
Mfg #: M-9130-150

Technical Specifications:
•Brand Name: Servo •Description: X-Axis Table Feed •For Use With: Clausing Atlas / Kalamazoo •Model Number: M-9130-150 •Type: 150

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (full-wave SCR control compound DC motor): to 150 in.- lb. / 17 NM torque •Intermittent Torque: 120 in.- lb. / 13.6 NM •Continuous Torque: 100 in.- lb. / 11.3 NM •Variable Feed Rate: .50-35 IPM / 13-889 mm/min •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approx. weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 16.0000

$ 1,062.53

Knee Powerfeed Type 200 for Bridgeport

Item #: JD80M0280200
Manufacturer: Servo
Mfg #: M-0280-200

Technical Specifications:
•Brand Name: Servo •Description: Z-Axis Knee Feed •For Use With: Bridgeport Series I •Model Number: M-0280-200 •Type: 200

Description:
•Semi-automated machining on Class 1 mills to 5 hp. •Peak Torque (half-wave series motor): to 200 in.- lb. / 22.6 NM torque •Intermittent Torque: 150 in.- lb. / 17 NM •Continuous Torque: 120 in.- lb. / 13 NM •Variable Feed Rate: .5-12 IPM / 13-305 mm/min (knee) •Rapid Traverse: 15IPM / 381 mm/min. (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 4.0A. •Approximate weight: 21 lb. / 9.4 kg.

Shipping Info:
•Actual Weight - 17.4500 •Shipping Weight - 18.0000 •Dimensions - Height: 23.4 Length: 7.80 Width: 12.8

$ 1,018.68

Table Power Feed - 150 inch/lbs; For Lincoln 10x50" 3KV

Item #: JD80M3800150
Manufacturer: Servo
Mfg #: M-3800-150

Technical Specifications:
•Brand Name: Servo •Description: X-Axis Table Feed •For Use With: Lincoln 10 x 50" 3KV •Model Number: M-3800-150 •Type: 150

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (full-wave SCR control compound DC motor): to 150 in.- lb. / 17 NM torque •Intermittent Torque: 120 in.- lb. / 13.6 NM •Continuous Torque: 100 in.- lb. / 11.3 NM •Variable Feed Rate: .50-35 IPM / 13-889 mm/min •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 21.0000

$ 990.13