Table Power Feed - 140 inch/lbs; For LMV

Item #: JD80M3700140
Manufacturer: Servo
Mfg #: M-3700-140

Technical Specifications:
•Brand Name: Servo •Description: X-Axis Table Feed •For Use With: Sharp LMV •Model Number: M-3700-140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 21.0000

$ 881.02

Acra 9 x 45 X-Axis Type 140 Powerfeed

Item #: JD80M5000140
Manufacturer: Servo
Mfg #:

Technical Specifications:
•Brand Name: Servo •Model Number: M5000140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approx. weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 21.0000

$ 906.51

Table Power Feed - For Bridgeport; Jet; Wilton

Item #: JD80M0200140
Manufacturer: Servo
Mfg #: M-0200-140

Technical Specifications:
•Brand Name: Servo •Description: X-Axis Table Feed •For Use With: Bridgeport Series 1 •Model Number: M-0200-140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 14.2500 •Dimensions - Height: 14.6 Length: 12.4 Width: 7.40

$ 881.02

Align Table Power Feed - AL500SZ; Z-Axis

Item #: JD30AL500SZ
Manufacturer: Align
Mfg #:

Technical Specifications:
•Brand Name: Align •Description: Z-Axis •For Use With: Bridgeport Style Mills •Model Number: AL500SZ •Type: Align Table Power Feed

Description:
•Easily mounts to almost any Bridgeport type knee mill, no modification necessary •Circuit panel is designed to accept replaceable insert type connectors •Nylon clutch has built-in torque release to prevent damage in the case of too much resistance •Standard Equipment: •On/off switch, forward, reverse, rapid traverse, jog button, 8' line cord, plug & mounting hardware AL500 Features:•Speed range: 0 to 160 RPM •Bevel Drive Gear Rate: 4.8:1 •Torque rating: 780 IN-LB (900Kgf/cm) •Power: 1 Amp/1 Phase/110 Volt •Weight: 15 lbs.

Shipping Info:
•Actual Weight - 64.6000 •Dimensions - Height: 10.6 Length: 18.0 Width: 10.9

$ 735.20

Align Table Power Feed - AL500SY; Y-Axis

Item #: JD30AL500SY
Manufacturer: Align
Mfg #:

Technical Specifications:
•Brand Name: Align •Description: Y-Axis •For Use With: Bridgeport Style Mills •Model Number: AL500SY •Type: Align Table Power Feed

Description:
•Easily mounts to almost any Bridgeport type knee mill, no modification necessary •Circuit panel is designed to accept replaceable insert type connectors •Nylon clutch has built-in torque release to prevent damage in the case of too much resistance •Standard Equipment: •On/off switch, forward, reverse, rapid traverse, jog button, 8' line cord, plug & mounting hardware AL500 Features:•Speed range: 0 to 160 RPM •Bevel Drive Gear Rate: 4.8:1 •Torque rating: 780 IN-LB (900Kgf/cm) •Power: 1 Amp/1 Phase/110 Volt •Weight: 15 lbs.

Shipping Info:
•Actual Weight - 15.2000 •Dimensions - Height: 14.6 Length: 10.7 Width: 7.00

$ 718.55

Table Power Feed - 140 inch/lbs; For All Purpose

Item #: JD80M2500140
Manufacturer: Servo
Mfg #: M-2500-140

Technical Specifications:
•Brand Name: Servo •Description: X, Y & Z Axis Powerfeed •For Use With: General Purpose •Model Number: M-2500-140 •Type: 140

Description:
•Semi-automated machining on Class 1 mills to 3 hp. •Peak Torque (half-wave series motor): to 140 in.- lb. / 15.8 NM torque •Intermittent Torque: 105 in.- lb. / 11.9 NM •Continuous Torque: 90 in.- lb. / 10.2 NM •Variable Feed Rate: .75-25 IPM / 19-635 mm/min (table & cross), .5-12 IPM / 13-305 mm/min (knee) •Gear Reduction Ratio (motor to screw shaft): 72:1. •Helical gearing and torque limiting friction safety clutch with new and improved gear •Electrical: 110V, 50/60 Hz, 2.5A. •Approximate weight: 15 lb. / 6.8 kg.

Shipping Info:
•Actual Weight - 12.6000 •Dimensions - Height: 14.5 Length: 12.3 Width: 7.40

$ 700.53

Align Table Power Feed - AL500SX; X-Axis

Item #: JD30AL500SX
Manufacturer: Align
Mfg #:

Technical Specifications:
•Brand Name: Align •Description: X-Axis •For Use With: Bridgeport Style Mills •Model Number: AL500SX •Type: Align Table Power Feed

Description:
•Easily mounts to almost any Bridgeport type knee mill, no modification necessary •Circuit panel is designed to accept replaceable insert type connectors •Nylon clutch has built-in torque release to prevent damage in the case of too much resistance •Standard Equipment: •On/off switch, forward, reverse, rapid traverse, jog button, 8' line cord, plug & mounting hardware AL500 Features:•Speed range: 0 to 160 RPM •Bevel Drive Gear Rate: 4.8:1 •Torque rating: 780 IN-LB (900Kgf/cm) •Power: 1 Amp/1 Phase/110 Volt •Weight: 15 lbs.

Shipping Info:
•Actual Weight - 14.0500 •Dimensions - Height: 14.6 Length: 10.8 Width: 7.00

$ 662.81

PRM Power Feed - RF30BPFT;

Item #: RL80RF30BPFT
Manufacturer: PRM
Mfg #:

Technical Specifications:
•Brand Name: PRM •Description: X-Axis Powerfeed •For Use With: RF311 Mill/Drill •Model Number: RF30BPFT •Type: Power Feed •Weight: 15 lbs

Description:
•Mill/Drill Powerfeed •For bench milling and drilling style machines •0-270 RPM •2.8:1 Drive gear rate •560 in/lb Maximum torque

Shipping Info:
•Actual Weight - 13.9500 •Dimensions - Height: 12.6 Length: 10.6 Width: 6.90

$ 596.52

Y-AXIS POWERFEED

Item #: PR67510Y
Manufacturer: PRM
Mfg #:

Technical Specifications:
•Brand Name: PRM •Description: Y-Axis •Model Number: AL-510Y •Weight: 16.5 lbs

Description:
•Maximum Torque: 650 in/lbs •Voltage 110V 50/60Hz •Speed Range 0 to 180 RPM

Shipping Info:
•Actual Weight - 16.5000 •Dimensions - Height: 1.00 Length: 1.00 Width: 1.00

$ 484.36

Z-AXIS POWERFEED

Item #: PR67510Z
Manufacturer: PRM
Mfg #:

Technical Specifications:
•Brand Name: PRM •Description: Z-Axis •Model Number: AL-510Z •Weight: 16.5 lbs

Description:
•Maximum Torque: 650 in/lbs •Voltage 110V 50/60Hz •Speed Range 0 to 180 RPM

Shipping Info:
•Actual Weight - 16.5000 •Dimensions - Height: 1.00 Length: 1.00 Width: 1.00

$ 484.36

Shaft Extension Kit - KP-0640SXKIT

Item #: JD80640SX
Manufacturer: Servo
Mfg #: KP-0640SXK

Technical Specifications:
•Brand Name: Servo •Description: Shaft Extension Kit •Model Number: KP-0640SXKIT •Type: Parts

Description:
•Shaft Extension Kit for Bridgeport knee mills

Shipping Info:
•Actual Weight - 5.7000

$ 410.94

Safety Handle Kit - KP-0620SHKIT

Item #: JD80620SH
Manufacturer: Servo
Mfg #: KP-0620SHK

Technical Specifications:
•Brand Name: Servo •Description: Safety Handle Kit •Model Number: KP-0620SHKIT •Type: Parts

Description:
•Safety Handle Kit for Servo powerfeed units

Shipping Info:
•Actual Weight - 6.0000 •Dimensions - Height: 6.50 Length: 6.00 Width: 6.00

$ 188.64

Limit Switch Kit - KP-0660MSKIT

Item #: JD80660MS
Manufacturer: Servo
Mfg #: KP-0660MSK

Technical Specifications:
•Brand Name: Servo •Description: Limit Switch Kit •Model Number: KP-0660MSKIT •Type: Parts

Description:
•Limit Switch Mounting Kit

Shipping Info:
•Actual Weight - 1.1350 •Dimensions - Height: .450 Length: 36.7 Width: .450

$ 102.99

Limit Switch Assembly for Type 150 Powerfeed

Item #: JD8020247
Manufacturer: Servo
Mfg #: 2024-7

Technical Specifications:
•Brand Name: Servo •Model Number: 20247 •Type: Parts

Description:

Shipping Info:
•Actual Weight - .4500 •Dimensions - Height: 1.27 Length: 12.7 Width: 9.00

$ 78.13

Limit Switch Assembly for Type 140 Powerfeed

Item #: JD8020237
Manufacturer: Servo
Mfg #: 2023-10

Technical Specifications:
•Brand Name: Servo •Model Number: 20237 •Type: Parts

Description:

Shipping Info:
•Actual Weight - .4500 •Dimensions - Height: 1.20 Length: 9.00 Width: 9.00

$ 72.75

Potentiometer Assembly for Type 150 Powerfeed

Item #: JD80C5568
Manufacturer: Servo
Mfg #: 5568

Technical Specifications:
•Brand Name: Servo •Model Number: C5568 •Type: Parts

Description:

Shipping Info:
•Actual Weight - .1500 •Dimensions - Height: 1.02 Length: 6.00 Width: 4.00

$ 42.02

Reversing Switch Assembly for Type 140 Powerfeed

Item #: JD80C50912
Manufacturer: Servo
Mfg #: 5091-2

Technical Specifications:
•Brand Name: Servo •Model Number: C50912 •Type: Parts

Description:

Shipping Info:

$ 42.02

Reversing Switch Assembly for Type 150 Powerfeed

Item #: JD80C5571
Manufacturer: Servo
Mfg #: 5571

Technical Specifications:
•Brand Name: Servo •Model Number: C5571 •Type: Parts

Description:

Shipping Info:
•Actual Weight - .0720

$ 31.59

Potentiometer Assembly for Type 140 Powerfeed

Item #: JD80C5085
Manufacturer: Servo
Mfg #: 5085

Technical Specifications:
•Brand Name: Servo •Model Number: C5085 •Type: Parts

Description:

Shipping Info:
•Actual Weight - .1240

$ 26.67